Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4333771 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair/maintenance Of Internal Electric Wiring, Submain, Mcb, Dbs, Eot Crane, Lift And Connected Works Under Ge Narangi |
| Last Date For Submission | 15th Jun, 2026 |
| Opening Date | 17 Jun, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 100000.00 |
| Estimated Cost | 5000000.00 |
| City | Guwahati |
|---|---|
| State | Assam |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Material and lanour for servicing of 05 Ton capacity flame proof EOT crane of any make installed at different building/location at site, making the cranes in serviceable condition complete all as specified and directed with and including opeartions for maintenance specified as under:- (A) LONG TRAVERSE MOTION- (a) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level. (b) Checking functioning of all brakes of any capacity and making adjustment for proper working. (c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement. (d) Checking of grease in geared coupling and tighting of nut/bolts etc. (e) Checking of motion cut off at extreme ends with limit switches. (f) Checking drive shaft and coupling including tighting of nut and bolts. (g) Checking oil in FLP thrustors checking any leakage any filling with new oil. (h) Checking terminal connection of all LT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. (B) CROSS TRAVERSE MOTION (a) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level. (b) Checking functioning of all brakes of any capacity and making adjustment for proper working. (c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement. (d) Checking of grease in geared coupling and tighting of nut/bolts etc. (e) Checking of motion cut off at extreme ends with limit switches. (f) Checking drive shaft and coupling including tighting of nut and bolts. (g) Checking oil in FLP thrustors checking any leakage any filling with new oil. (h) Checking terminal connection of all CT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. | 7.00 | Each Job |
| 2 | (C) HOIST MOTION (a) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level. (b) Checking functioning of all brakes of any capacity and making adjustment for proper working. (c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement. (d) Checking of grease in geared coupling and tighting of nut/bolts etc. (e) Checking of motion cut off at extreme ends with limit switches. (f) Checking drive shaft and coupling including tighting of nut and bolts. (g) Checking oil in FLP thrustors checking any leakage any filling with new oil. (h) Checking terminal connection of all hT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. (D) ELECTRICALS (a) Checking and tightening all electric connection (b) Checking the contactors/ relays etc for overheating or flashinng. Clening off all connection and control cables. (d) Properly bunching the loose control cable. (e) Checking functioning of cable carriers. (f) Checking the connection and serviceability of VVVF drives for smooth working. (E) GROUND MOTION CONTROL PANEL Opening the push button control unit, checking all connection, replacing flashed/ over heated connections, general cleaning and checking all the functions,of the LT/CT/ Hoist motion push buttons and lights/ VVVF switch including reassembling the unit complete Note :Testing and necessary Inspection be carried out by competent person from office of Cheif inspector of Crane as per policy for use of crane and test report be submitted in dupicate by contractor to Engr in charge and cost thereof deemed to be included in the quoted rate . | ||
| 3 | All as per item No. 1 here-in-before but 3 ton capacioty EOT crane complete all as specified and directed. NOTE :- 1. Gear box oil shall be measured and paid separately. | 2.00 | Each job |
| 4 | Material and labour for comprehensive maint/minor repair by service Engineer of OEM or his authorised rep having minor adjustment of all landing gate & car gate, controller dressing, car cleaning, sensor reapair/replacement and controller cleaning, replacement of gear oil, adjustment of guide shoe holder, OSG pit clearance adjustment of electrically operated lift of capacity 1000 kgs, Speed 0.70m/sec, 2 floor/2 stop, collective down control type, 3 phase, V3F drive type, checking and repairing sensor system for smooth operation, manual/auto door ACO installed at NBC storage shed of 222 ABOD complete all as specified and directed. Make of LIFT: ECE Pvt Ltd Note: Testing and necessary Inspection be carried out by competent person from Office of the Chief Inspector of Lift & Excalator of State as per Rule 4 & 6 of The Assam Lifts and Excalators Rule 2016 or as per policy for use of lift and Test report be submitted in duplicate by contractor complete all as specified and as directed. | 1.00 | Each job |
| 5 | Taking down old defective from Main hoisting 3 lengths of wire ropes of 10mm dia and Supply and fix new steel wire ropes of 10mm dia 3 lengths of same length alongwith all fittings assy such bulldog gripe, nuts & bolts of suitable size include testing and commissioning on load complete all as specified and directed. Make: USHA/Martin | 1.00 | Job |
6 Days Left