Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4219968 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair And Maint To Certain Roads And Connected Works At Age B/r-ii Under Ge Jhansi |
| Last Date For Submission | 15th Jun, 2026 |
| Opening Date | 17 Jun, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 160000.00 |
| Estimated Cost | 9000000.00 |
| City | Jhansi |
|---|---|
| State | Uttar Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Repair to pot holes any depth, not exc 1.0 sqm each including sweeping free from dust and mud, or water, scouring sunken surfaces in roads , paths etc. cutting around edges to at least 25mm in depth making good by applying tack coat @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm blinded with 0.09 cum of stone, chippings, 6.3 mm size and again rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm complete all as specified and directed. | 20.00 | 10 Sqm |
| 2 | M&L for laying premix bituminous macadam (consolidated thickness 75mm or less) with paving bitumen VG-30 @ binder content of 4% by weight of total mix (design mix), prepared in hot mix plaint, laid/rolled and compacted to required gradient and camber with 08 to 12 tonne power roller and vibratory roller etc complete all as specified and directed. | 50.00 | Cum |
| 3 | M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags or mechanical air compressor machine to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sqm using paving bitumen VG-10 complete all as specified and directed. | 2050.00 | 10 Sqm |
| 4 | M&L for providing bituminous premixed asphaltic semi dense concrete (design mix) 30mm consolidated thickness using paving bitumen VG-30 @ 5.5% binder content by weight of total mix, laid/spread uniformly by means of mechanical pavers over primed black top surfaces rolled and compacted to required camber and gradient using 10 to 12 tonne power roller, complete all as specified and directed complete all as specified and as directed. | 1950.00 | 10 Sqm |
| 5 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick center or edge line, stop lines, dashes, arrows, etc and the like n exc 10 cm wide hot applied thermo plastic road marking paint (reflective type ) of uniform finishing with machine conforming to BS 3262 (Part-I) 1989 read with most specification of 803 clause 4.2.1 and 4.2.2 on bituminous surface in white / yellow/ red colour and super imposed with glass slam beats conforming to BS 6088 and most specification 803 clause 4.3.3 including cleaning of surface by removing all dust dirt oil grease etc including removing of existing marking with spirit / kerosene / gas burner or mechanically on bituminous surface complete all as specified and directed. | 805.00 | Sqm |
6 Days Left