Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4315226 |
|---|---|
| Organisation Name | Local Self Government Department |
| Tender Brief | Corrigendum : Mla-sdf-mla Sdf-2025-26 Construction Of Ems Stadium Entrance Gate And Complete Sculpture Of Ems-mla Sdf-2025-26 Construction Of Ems Stadium Entrance Gate And Complete Sculpture Of Ems ) |
| Last Date For Submission | 25th May, 2026 |
| Opening Date | 26 May, 2026 |
| Document Cost | 1050.00 |
|---|---|
| EMD | 11900.00 |
| Estimated Cost | 475981.00 |
| City | Kasaragod |
|---|---|
| State | Kerala |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | GATE | ||
| 2 | 25.1:Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).The weight of aluminum extruded section shall be taken for purpose of payment | 77.813 | kg |
| 3 | OD439907/2025-2026:Designing, fabricating, , installing and fixing in position special design Aluminium Composite Panel Cladding linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis as per relavent IS codes . b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in required shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick core sandwiched between two Aluminium sheets (each0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts,washers, cleats, weather silicone sealant, backer rods etc. The item includes cost of all material & labour component, the cost of all mock ups at site,cleaning and protection of the cladding till the handing over the building for occupation. . Base frame work for ACP cladding is payable under the relevant item.s The Contractor shall provide aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places (Modified 25.7) | 77.813 | sqm |
| 4 | 13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work | 27.000 | sqm |
| 5 | OD440027/2025-2026:Providing and fixing stainless steel (Grade 304) three dimension English Letters or Numbers , 22 gauge front side and projection 24 gauge including buffing, polishing and and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the Letters to the wall with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. as per approval of Engineer-in-charge, 35.00 cm height SS 3D letters | 44.000 | each |
Ending Today