Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4418629 |
|---|---|
| Organisation Name | Water Resources Development Directorate |
| Tender Brief | Corrigendum : Rewinding And Repairing Of 17.5 H.p. A.c. 3 Phase, 2800-2900 R.p.m., 50 Hz Submersible Motor Of Different Make With Repairing Of Submersible Pump Bowl Assembly Under Jalangi (a-i) Sub-division Under Berhampore-i(a-i) Division Under Non-plan. |
| Last Date For Submission | 15th Jun, 2026 |
| Opening Date | 18 Jun, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 8000.00 |
| Estimated Cost | 375928.00 |
| City | Murshidabad |
|---|---|
| State | West Bengal |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Dismantling of different H.P. 2800/2900/3000 RPM for submersible motor, removing old burnt out coil from the solts carefully, segregation all the parts, washing and cleaning the same throughly for verification of serviceable and unserviceable parts as per direction of E.I.C. 17.5 H.P Submersible Motor | 10 | Each |
| 2 | Rewinding of 3 phase 410-440 volt 2800/2900 RPM 3 pole 50 cycle AC supply submersible motor of different make with PVC insulated copper winding-wire (Incable / Finolex make) as per I.S. 8783 ,1995(Part-4/Sec1 ) and as per size provided by the manufacturer of the motor on slots including supplying fitting and fixing fire proof fiber chips on slots for keeping winding wires in position, coil , joints souldered properly, taped by using the waterproof tape 660 volt grade(as per approved of the Engineer-in-Charge) with main cable and fitted with water tight compound by using steel grip tape and volcanised rubber tape by method of heating effect including supplying fitting, fixing rings, circlips for thrust plate water seal ring and complete reassembling the motor with repaired spares or new spares (to be supplied departmentally) as per direction of the (E.I.C). 17.5 H.P., 3phase, 410-440 volts, 50 Hz, 2 pole, 26 amps-30 amps submersible Motor. Supply of PVC insulated copper winding wire conforming IS 8783,1995,part 4/ sec 1. Length of copper winding wire Maximum-450.00Mtr 1.5 mm nom. Dia for 17.5 H.P | 4250.00 | Mtr. |
| 3 | Labour Charges for rewinding , water proofing, fitting & fixing fire proof fibre chips on slots for keeping winding wires in position, taped by using water proof tape of 660 volt grade with main cable and fitted with water tight compound by using steel grip tape and vulcanized rubber tape by heating as per direction of E.I.C. | 10 | Each |
| 4 | Repairing of damaged motor shaft by metaling with electric welding and turning properly to house in the bearing space and coupling side teeth and also rectifying the dynamic balance of the rotor to its original alignment to a void any vibration all complete as per direction of E.I.C. | 10 | Each |
| 5 | Supplying fitting & fixing the winding protector on both sides (Top & bottom) | 20 | Each |
6 Days Left