Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4219956 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repair To Building No F-66 At Hawk Hill Under Age B/r-ii Of Ge Saugor |
| Last Date For Submission | 2nd Jun, 2026 |
| Opening Date | 04 Jun, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 89300.00 |
| Estimated Cost | 4465000.00 |
| City | SAUGOR |
|---|---|
| State | Madhya Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening n'exc 1.5 Sqm each, removing from the site complete all as specified and directed. Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates. (ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder. | 24.00 | Each |
| 2 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening exc 1.5 sqm and n'exc 4.00 sqm each, removing from the site complete all as specified and directed. Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates. (ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder | 42.00 | Each |
| 3 | M&L for Mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm long including MS angle iron frame 40mm x40mmx 5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed by Engineer-in-charge. [Single shutters of approx width 0.8 to 1.2 m and ht 1.9 to 2.10 M.] | 4.00 | Sqm |
| 4 | M&L for mild steel framed work such as grills gratings, sun shed cover fixed with nut bolts incl, cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framed work or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed. | 800.00 | Kg |
| 5 | S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, supplying & fixing in opening as per specification. Note: The cost of fasteners (10mm dia, 100mm long, min 6 Nos.) shall be deemed included in quoted unit rates. | 38.00 | RM |
8 Days Left