Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3517634 |
|---|---|
| Organisation Name | Health And Family Welfare Department |
| Tender Brief | Corrigendum : Section 3. Surgical & Suture Non Edl 2025-26-27 Surgical & Suture Non Edl Item List Part - 23 |
| Last Date For Submission | 23rd Mar, 2026 |
| Opening Date | Refer to Documents |
| Document Cost | 15000.00 |
|---|---|
| EMD | 405340.00 |
| Estimated Cost | 0.00 |
| City | Bhavnagar |
|---|---|
| State | Gujarat |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Secure Fit, breathable, Thin ,Soft and Flexible Polyurethane Film. Waterproof & Bacteria proof Dressing. With integrated Split Liner.With integrated Split Liner and printed 1cm square grid.10cmX10m(1 Roll) Proprietary Article Certificate (PAC) with USFDA | 7702 | Innovative Surgical Post Operative Dressing coated |
| 2 | Innovative Surgical Post Operative Dressing coated with Proprietary Dialkylcarbamoyl chloride (DACCTM) technology impregnated acetate tissue with absorbent pad and transparent film border. Hydrophobic interaction irreversibly binds bacteria and fungi rendering them inactive preventing toxin release and replication. Binds 108 bacteria within 2 hours even virulent bacteria like MRSA and VRE. With this technology no known cytotoxicity, resistance, and systemic absorption 6cmX20cm Proprietary Article Certificate (PAC) with USFDA | 7704 | HYDROSURGERY SYSTEM1. It should be a Hydrosurgery |
| 3 | Foot switch for above FOR HYDROSURGERY SYSTEM Foot switch pedal should be light weight (not more than 3lbs) and should have long cord ( 15ft) | 7706 | handles for above It should have single use angled |
| 4 | handles for above It should have single use angled hand piece (45 degree) with a cutting window of 14mm (+/- 10 Percent) with high pressurecord and disposal tubing. | 7708 | handles for above It should have single use angled |
| 5 | Micro Scissors, straight, sharp/sharp, 160 mm (6 1/4"), flat handle, cross serration, Tungsten Crabide inlay should be nickel based & inlay should be welded to the instrument and not pasted ,Laser engraving preferred, as well as individual, machine- readable encoding to allow individual instrument tracking. The matting process must be followed, verified, by effective, chemical passivation (see ASTM Designation: A 380-06, A 967). Corrosion resistance: acc. to DIN EN ISO 13402, it should be non magnetic , All instruments should adhere to following steel Composition: X46Cr13, X45CrMoV15 compulsory , All instruments should be supplied from single manufacturer | 7710 | Micro Scissors, curved, sharp/sharp, 160 mm (6 1/4 |
7 Days Left