Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3572285 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair/ Maint Of Dispersal And Air Field Area In Tech Area At Af Stn Palam Under Ge (af) Palam, Delhi Cantt-10 |
| Last Date For Submission | 24th Mar, 2026 |
| Opening Date | 31 Mar, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 98000.00 |
| Estimated Cost | 4900000.00 |
| City | Delhi |
|---|---|
| State | Delhi |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Demolition of unreinforced cement concrete / bituminous surface in ground floors and pavings exc 15cm thickness below or above ground level complete all as specified and as directed. | 312.00 | Cum |
| 2 | Removing demolished materials (concrete etc) to a distance exc 1.5 Km and not exc 5 Km outside MoD land complete all as specified and as directed. | 312.00 | Cum |
| 3 | M&L for applying evenly a tack coat of bitumen VG-10 grade conforming to IS: 73 at a rate of application of 2.5 kg/ 10sqm on bituminous surface as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as specified and as directed. | 104.00 | 10Sqm |
| 4 | Supplying and laying 400 micron thick HDPE sheet (Virgin Quality) water proof, wrinkle free without puncture having minimum weight 390 gm/Sqm over tack coat/sand cushion as specified in the design with overlap between adjacent strips and at transverse joints as minimum 300mm complete all as specified and directed. | 1040.00 | Sqm |
| 5 | Supply and laying 350mm thick pavement quality concrete (PQC) of minimum 28 days field Flexural strength of 45Kg/ Sqcm or 4.5 Mpa, aggregate gradation as per Table 3 of IRC 15- 2017, coarse aggregate of clean, hard strong, dense, non-porous and durable pieces of crushed stone or gravel, fine aggregates of clean natural sand or crushed stone sand or combination of both using minimum 400 kg/cum of cement with non-circular, virgin synthetic fibre of 12-18 mm length, specific gravity 1.34 to 1.39, UV stable, alkali resistant, with equivalent dia 15-40 micron, minimum melting temperature as 240 C and minimum tensile strength of 300 Mpa and at the rate as specified by the manufacturer. PQC laid, spread and compacted with slip-form paver of minimum 7.50 m width, including curing and tining by texturing cum curing machine complete all as specified and directed. Required surface texturing to be done as specified in Clause 10 1 14 and Table 9 of IRC 15-2017. Notes :- (a) Non circular virgin synthetic fibre shall be deemed to be included in unit rates. (b) The admixture as per approved design mix shall be added and mixed. The cost of admixture required shall deemed to be included in the quoted rate. (c ) Construction joints, Dummy joints and expansion joints shall be measured and paid separately under respective items. Deduction shall be made in PQC of quantity for expansion joints. (d) Trimming of vertical edges of construction joint longitudinal and transverse shall be carried out using sawing machine to maintain straight edge before laying of adjacent / subsequent lane. The quoted rate shall be deemed to be inclusive of this provision and nothing extra shall be paid on this account. (e) For the purpose of pricing this item, the cement content shall be considered as 400 kg/cum. However, actual cement content shall be worked out as per design mix and nothing extra shall be paid on this account if cement content required in design mix is more than 400 Kg/Cum. However, if cement content is less than 400 Kg / Cum in design mix, a minus deviation order shall be prepared for supply only cement rate @ Rs 6.70 per Kg of cement (f) Curing compound shall be applied at the paving stage after broom finish and surface is dry, and rate for spray of curing compound as per manufacturer's instructions shall be deemed to be included in unit rate. (g) The quoted rate shall be inclusive of M&L for formwork for total thickness. (h) At locations like link fillets, small areas etc where the slip form paver cannot be used for laying fixed form paver with minimum 5m width can be used. | 312.00 | Cum |
6 Days Left