Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3781725 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | Various Civil Repair Work In Qtr No A-12 Under Sub Dn Gandhi Nagar Iv Jaipur (job No.-31/se City/cd-iii/ 2216-mtc Rep/05/2025-26) |
| Last Date For Submission | 23rd Mar, 2026 |
| Opening Date | 24 Mar, 2026 |
| Document Cost | 200.00 |
|---|---|
| EMD | 9740.00 |
| Estimated Cost | 487000.00 |
| City | Jaipur |
|---|---|
| State | Rajasthan |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Carriage of Material Earth, Sand, Lime, Morrum manure or sludge including loading and unloading For 20 Km. | 10.00 | Cum |
| 2 | Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 60 cm girth upto including 120 cm girth | 2.00 | Each |
| 3 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils | 5.50 | Cum |
| 4 | Providing gola 75x75 mm in cement concretee 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : | 55.00 | Mtr. |
| 5 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 5.0mm thick (Wt. 8.4 Kg./Mtr. Sq.) | 52.00 | Sqm |
3 Days Left