Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3056363 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Provn Of Toilet Block With 02 X Wc And 02 X Urinal Pot Near Football Ground At Building No P-165 (ration Store) At Certain Mil Unit And Special Repair To Building No P-120 (01 X Offr Qtr) At Certain Mil Unit In Cooch Behar Mil Stn Under Ge (s) Binnaguri |
| Last Date For Submission | 5th Mar, 2026 |
| Opening Date | 12 Mar, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 52000.00 |
| Estimated Cost | 2596000.00 |
| City | Jalpaiguri |
|---|---|
| State | West Bengal |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | M&L for 10mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for applying single component acrylic polymer modified, finished even and smooth without using extra cement mixed with water proofing compound complete all as specified and as directed. (NOTE : Polymeric membrane and WPC shall be measured and paid separately under relevant item of this Schedule 'A'). | 35.00 | Sqm |
| 2 | M&L for water proofing treatment to RCC roof slab including parapet comprising of the following course of treatment / specified from bottom to top (a) Applying Bituminous primer @ 0.40 Ltr per Sqm over plastered surfaces of roof including parapet surfaces. Bituminous primer shall be 'Tar Mastic' manufactured by M/S STP LTD or 'EMW FLATE' manufactured by M/S Texsa India Ltd. (b) Over the priming coat laying one layer APP based polymeric membrane of approved manufacturer, 3 mm thick of weight not less than 3.60 Kgs/Sqm reinforced with non woven polyester fabric weight not less than 160 gms per Sqm. Polymeric members shall be taken to a height of 60cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (c) Application of two coat of bituminous aluminium paint over the polymeric membrane after necessary preparation and cleaning. Note :- (i) Laying APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions. (ii) A minimum overlap of 100mm shall be made at the end and 75mm shall be made at the sides of the polymeric membrane respectively and sealed all overlaps and joints as per Manufacturers instructions. (iii) APP based polymeric membrane shall be "SUPER THERMOLAY" manufactured by M/S STP LTD or MOPLY FP manufactured by M/S Texsa India Ltd. | 35.00 | Sqm |
| 3 | Supply only liquid water proofing compound. | 5.08 | Ltr |
| 4 | M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. | 6.00 | Cum |
| 5 | M&L for brickwork with burnt fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. | 27.00 | Cum |
2 Days Left