Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3779701 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | New Construction Work Of Chaubepur Bandimata To Nonha Kalan Link Road |
| Last Date For Submission | 25th Mar, 2026 |
| Opening Date | 25 Mar, 2026 |
| Document Cost | 1189.00 |
|---|---|
| EMD | 245000.00 |
| Estimated Cost | 2445000.00 |
| City | Kanpur |
|---|---|
| State | Uttar Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Construction of embankment with approved material obtained from borrow pits with all lifts upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-1 and 300.2 with lead up to 1000m as per technical specification clause 301.5 | 1040.00 | Cum |
| 2 | CTSB - Providing, laying and spreading material on a prepared subgrade, adding cement @ 2% by weight to the spread material manually, mixing in place with Rotavator and compacting with the Road Roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base. | 173.50 | Cum |
| 3 | CTB - Providing, laying and spreading material on a prepared base, cement @ 4%by weight to the spread material manually, mix in place with Rotavator and compacting with the Road Roller at OMC to achieve the desired unconfined compressive strength and to form a layer of base. | 230.00 | Cum |
| 4 | Tack Coat (i) Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.Clause 503. MORD | 1650.00 | Sqm |
| 5 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness compesed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a Suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by Type C seal coat as per Technical Specification Clause 508 Mord | 1650.00 | Sqm |
5 Days Left