| 1 | M&L for repairs to pot holes, not exc 1 square metre each, including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, cutting around edges to at least 25 mm in depth, on existing road surfaces, and making good applying evenly a tack coat of paving bitumen primer of grade VG-10 at the rate of 05 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 sqm of paving bitumen (VG-30), blinded with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed including supply of premixed macadam, binder and chipping, depth of pot holes exc 30mm, complete all as specified and as directed.
Note : Job mix formula of premix bituminous macadam shall be approved by GE. | 1.00 | 10 Sqm |
| 2 | M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud and bushes near road side etc including sweeping with brooms and finally fanning the cleaning surface free from dust and mud, sunken surfaces with gunny bags to remove all loose dirt existing road surfaces, and making good applying evenly a tack coat of paving bitumen primer of grade VG-10 at the rate of 5 Kg per 10 Sqm, over paving bituminous macadam or black top surfaces complete all as specified and as directed. | 730.00 | 10 Sqm |
| 3 | M&L for providing, laying, spreading 30mm thick (consolidated thickness) of premix Semi Dense Asphaltic Concrete (SDAC) with crushed and graded coarse aggregates as per design based on Job mix formula with 5.0% bitumen binder content (bitumen of Grade VG-30) by weight of total mix including heating bitumen to the required temperature, mixing bituminous concrete in automatic and temperature controlled drum type hot mixing plant, laying, spreading uniformly by means of Mechanical paver and rolling and consolidating to the required gradient and camber with 8 to 12 tonne power road roller and Vibromax roller to a uniform smooth surfaces complete all as specified and as directed.
Notes : (i) The work shall be executed as per design mix approved by GE. (ii) Paving bitumen of Grade VG-30 for semi dense asphaltic concrete shall be used and shall be procured by the contractor under his own arrangement and at his own cost. (iii) Cost of all the materials, T&P, labour etc. required for preparation of surfaces, providing and laying semi dense asphaltic concrete including procurement of bitumen as specified here-in-before, stone aggregates & sand etc., rolling and all other elements required for entire completion of the job shall be deemed to be included in the unit rate quoted for this item. (iv) Bituminous concrete shall be mixed in drum type hot mix plant, transported from plant to work at site and laid/spread by means of mechanical paver finisher. (v) Filler for bitumen concrete shall be OPC grade @ 2% of total mix. (vi) Contractor shall quote his rate on the basis of binder as mentioned in this item. If there is any minus variation in the actual binder content used as per design mix approved by GE, the rate shall be adjusted as per invoice submitted by contractor per Kg of binder used. However no price adjustment shall be made if the binder content works out to more than as specified in this item. | 730.00 | 10 Sqm |
| 4 | S&F Solar delineator made out of polycarbonate four ultra bright flashing LEDs which give 360 degrees viewing, available in red and yellow colours, special base for mounting on cone, pole etc high quality reflactive solar panel to maximize sun absorption and operating time 3-4 consecutive days (with full battery charge), high intensity retro reflective band of 1" width for extra visibility and mounted on 50mm dia mild steel pipe of 1010mm height duly powder coated with anti theft steel net for reflactor protection including delineator shall be fixed in plain cement concrete 1:2:4 Type B1 (using 20mm graded stone aggregate) block of size 150x150x300mm deep, including necessary excavation & earthwork, complete all as specified and as directed including dismantling and taking out old unserviceable / broken delineator of any type. | 10.00 | Each |
| 5 | S&F Solar Stud of size 125mm x 125mm x 25mm (shank 65 mm), aluminium alloy shell, electronically operated automatically turns ON at night and turns OFF at day, high efficiency mono crystalline solar panel 2.4 V / 0.3 Watt, one Ni-Mh or Ni-Cd rechargeable battery (1.2 V / 1600 MA), six super bright LEDs with 10000 to 18000 mcd (Millicandela), view distance upto 1000m, flash rate 2 Hz, capable to withstand weight upto 10 tonne, unbreakable poly carbonate clear facing designed for maintenance free operation, 100% water proof design according to IP-65, Red or Amber colour, including dismantling and taking out old unserviceable / broken solar stud of any type complete all as specified and as directed. | 30.00 | Each |