Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3594142 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repair Of Street Light Poles, Connected Cables, Lights For Various Roads Under Ge (mcte) Mhow |
| Last Date For Submission | 30th Mar, 2026 |
| Opening Date | 01 Apr, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 87420.00 |
| Estimated Cost | 4371000.00 |
| City | MHOW |
|---|---|
| State | Madhya Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supply and fixing led street light 90 Watt with Epoxy Polyster powder coated pressure die-cast aluminium housing,LEDs are provided with non-yellowing decorative IP lens optic, Silicon gaskets provided for LEDs and control gear compartments,The driver used is specially designed to have built-in surge voltage, open/ short circuit protections, External surge protection provided for additional safety, Side entry mounting for 55 to 65mm OD pipe bracket. Ressure die-cast aluminium housing for aiming adjustment of 90 watt led street light with high power led lumnious efficacy 130 lm/watt, correlated color temperature 5665K 355K, luminous flux 11700 lm, CRI >70, Die cast aluminum body with pennut lens, Impact resistence 08, Ingress protection 66, Built surge protection 4kv and 10kv both will be inbulid in fixture only, Maintenance of lumen output will be minimum 50,000 hours as per L70B50 clause, Led Chip will be reputed brand only Osram, Cree, Nichee, Birgdelux, philips or authorisedonly, Power factor will be >0.95 not less than .95. Warranty certificate of LED fitting should be atleast 3 years and same should be produced to department through OEM directly. Any defects within warranty period will be rectified by contractor and earth connection of each light fitting should be connected to the system earth point either with 3 core cable or though seprate earth cable complete all as specified and directed. | 160.00 | Each |
| 2 | All as per Srl item No. 1.00 above but capacity 60 Watts. | 85.00 | Each |
| 3 | Supply and fixing of 200 watt led flood light Graphite grey powder coated; matt finished pressure die cast aluminium housing designed to act as heat sink foefficient dissipation of heat, Heat resistant toughened glass provided with silicon gasket for efficient Ingress protection, LEDs are provided with secondary polycarbonate lens optics to get optimum optical performance, Constant current LED driver used is specially designed to have built-in surge voltage, open/short circuit protections. Luminaire is provided with a MS mounting bracket fixed on pressure die-cast aluminium housing for aiming adjustment of 200 watt led flood light with high power led lumnious efficacy 120 lm/watt,correlated color temperature 5665K 355K, luminous flux 24000 lm, CRI >70, Die cast aluminum body with toughned glass along with pennut lens, Impact resistence 08, Ingress protection >66, Built surge protection 4kv and 10kv both will be inbulid in fixture only, Maintenance of lumen output will be minum 50,000 hours as per L70B50 clause, Led Chip will be reputed brand only Osram, Cree, Nichee, Birgdelux, philips only, Power factor will be >0.95 not less than .95. Warranty certificate of LED fitting should be atleast 5 years and same should be prodused to department through OEM directly. Any defects within warranty period will be rectified by contractor and earth connection of each light fitting should be connected to the system earth point either with 3 core cable or though seprate earth cable complete all as specified and directed. | 29.00 | Each |
| 4 | All as per Srl item No. 3.00 above but 120 Watt. | 40.00 | Each |
| 5 | All as per Srl item No. 3.00 above but 150 watt | 40.00 | Each |
11 Days Left