Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3596708 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : External Periodical Services For May 2026 Pop In Zone A Area At Nda Khadakwasla |
| Last Date For Submission | 31st Mar, 2026 |
| Opening Date | 02 Apr, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 60000.00 |
| Estimated Cost | 3000000.00 |
| City | Multi city |
|---|---|
| State | Multi State |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | M&L for complete removal of existing treatment on wall by scrapping (nails, screws if any to be removed properly before sanding) and Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour complete all as directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer (i) Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd. | 5000.00 | Sqm |
| 2 | Ditto all as per item No 01 above but for Ceiling surface complete all as specified and as directed. (i) Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd. | 1000.00 | Sqm |
| 3 | M&L for water proof cement based putty @ 0.75 Kg (undiluted) per sq mtr. of average thickness 1 mm over the plastered / old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface. Step.4) Cracks of walls to be filled with its filling paste. Notes: Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd. | 2500.00 | Sqm |
| 4 | Ditto all as per item No 03 above but for Ceiling surface complete all as specified and as directed. Notes: Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd. | 1000.00 | Sqm |
| 5 | M&L for applying two coats of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note (i) Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd. | 2500.00 | Sqm |
6 Days Left