Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3013573 |
|---|---|
| Organisation Name | Jamia Millia Islamia |
| Tender Brief | Corrigendum : Providing And Fixing Wooden Laboratory Rack With 5 Mm Glass On Base Complete At Chemistry Lab Sah Sr. Sec. School, Jamia Millia Islamia. |
| Last Date For Submission | 6th Mar, 2026 |
| Opening Date | 10 Mar, 2026 |
| Document Cost | 150.00 |
|---|---|
| EMD | 651.00 |
| Estimated Cost | 32530.00 |
| City | Multi city |
|---|---|
| State | Multi State |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc._Kiln seasoned and chemically treated hollock wood | 0.2 | cum |
| 2 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately)._25 mm thick | 5.5 | sqm |
| 3 | Applying priming coat:_With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood | 10 | sqm |
| 4 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :_Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | 10 | sqm |
| 5 | Providing and fxing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :_For fixed portion_Powder coated aluminium (minimum thickness of powder coating 50 micron) | 3.24 | kg |
3 Days Left