Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3596710 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Smart Periodical Services To Sqn Bldg. In Zone B Area During Eot May 2026 At Nda Khadakwasla |
| Last Date For Submission | 31st Mar, 2026 |
| Opening Date | 02 Apr, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 98000.00 |
| Estimated Cost | 4900000.00 |
| City | Multi city |
|---|---|
| State | Multi State |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | M&L for complete removal of existing treatment on wall by scrapping (nails, screws if any to be removed properly before sanding) with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour complete all as directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. | 16400.00 | Sqm |
| 2 | --ditto-- as item sl no 01 but for Ceiling surface complete all as specified and as directed. | 2360.00 | Sqm |
| 3 | M&L for water proof cement based putty @ 1 Kg (undiluted) per sq mtr. of average thickness 1 mm over the plastered / old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface. Step 4) Cracks of walls to be filled with its filling paste. | 16000.00 | Sqm |
| 4 | --ditto-- as item sl no 3 but for Ceiling surface complete all as specified and as directed. | 2260.00 | Sqm |
| 5 | M&L for one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied on wall with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats. | 16000.00 | Sqm |
6 Days Left