Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3754484 |
|---|---|
| Organisation Name | Himachal Pradesh Irrigation And Public Health Department |
| Tender Brief | Sh Providing Laying Jointing And Testing Of G.i. Pipe 32 Mm Dia (lc) 4500 Rmt., 25 Mm Dia (lc) 1800 Rmt., 20 Mm Dia 4600 Rmt., And 15 Mm Dia (lc) 1250 Rmt. For Restoration Of Water Supply Schemes I.e. Wss Parkot Kamand, Wss Lajheri, Wss Kir |
| Last Date For Submission | 24th Mar, 2026 |
| Opening Date | 25 Mar, 2026 |
| Document Cost | 1500.00 |
|---|---|
| EMD | 62622.00 |
| Estimated Cost | 3131122.00 |
| City | Multi city |
|---|---|
| State | Himachal Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Excavation in foundation and trenches (For pipes and pits) up to all depths and in all classification of each work such as pick work, jumper work, saturated soil including bailing or pumping out of water, blasting soft or hard rock or chiselling or wedging out of soft/ hard rock, where blasting is prohibited, in all lifts including trimming and dressing of sides, levelling of beds to correct grade including shoring, strutting, planking, timbering and dewatering where ever required. Stacking usable and unusable material/ soil separately and after laying, jointing and testing of pipes, returning the usable soil in 15cm layers by ramming and watering and then disposing of all surplus excavated soil/ unusable material as directed within all leads/ lifts including restoration of unmetalled surfaces to its original condition and including cost of diversion for traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads and lifts as per direction of Engineer-in-Charge. Pick & Jumper work | 1817.270 | Cum |
| 2 | Providing Laying, jointing and testing in trenches galvanized mild steel screwed and socketed pipes confirming to BIS 1239 (Part-1) 2004 (Latest with upto date ammendements having wall thickness as per code and capable of withstanding required test pressure in a random length of 4 to 7 meters.) of following class and diameter from approved manufacturer complete in all respect and stacking proper at site with the entire satisfaction of the Engineer-in-Charge. | ||
| 3 | 32 mm dia. (Light class) Screwed & Socketed. | 4500.000 | Rmt. |
| 4 | 25 mm dia. (Light class) Screwed & Socketed. | 1800.000 | Rmt. |
| 5 | 20 mm dia. (Light class) Screwed & Socketed. | 4600.000 | Rmt. |
6 Days Left