Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3525554 |
|---|---|
| Organisation Name | Indian Institute Of Technology |
| Tender Brief | Corrigendum : Providing Vrv/vrf Enabled Conditioned Environment For Scientific Equipment Installed At Central Research Facility, Iit Ropar Including Providing Suitable Protection To The Installed Equipment With Five Year Camc |
| Last Date For Submission | 23rd Mar, 2026 |
| Opening Date | 24 Mar, 2026 |
| Document Cost | 590.00 |
|---|---|
| EMD | 120770.00 |
| Estimated Cost | 6038470.00 |
| City | Ropar |
|---|---|
| State | Punjab |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Outdoor Unit | ||
| 2 | Supply, Installation, Testing & Commissioning of factory fitted microprocessor based self-diagnostic auto check VRV/VRF system outdoor unit equipped with PCBs, accumulator, oil separator, brushless DC inverter fan motor, OEM self- manufactured hermetic sealed multi valve scroll type compressors. Compressor should be based on low pressure shell technology for longer life with integrated IPM & PWM to ensure effective operation even at low/partial load conditions for better efficiencies. Compressor shall be fixed in metallic chamber for lower noise with enhanced fire safety protection. Outdoor unit shall be equipped with highly efficient induction type heater using eliminated wasted heat. VRT/VET system shall be based on advanced & automatically modulation evaporating refrigerant temperature between 0 C to 11 C for instant cooling and better energy efficiency as per user's demand. Outdoor units shall be essentially equipped with safety devices like fuse, noise filter PCB, low pressure switch, high pressure switch, pulse based LEV for optimized refrigerant flow control, isolating valve, protective corrosion resistant polyester coating on panels, hydrophilic coating on Aluminium fins, protective polyurethane coating on PCB, OEM provided Inbuilt automatic reverse phase detector & sequencer/corrector to avoid any kind of failure due to phase sequence reversal which makes system reliable and redundant. Heat exchanger must be essentially equipped with internally grooved copper tubes for better heat exchange performance and operate in extreme conditions i.e. even at ambient temperature of 52 C or more. Outdoor units shall be pre-charged with R410A gas, pump down function and shall also be equipped with charging valve/ports for additional charge of refrigerant as per site requirement. All outdoor unit shall be able to perform in duty cycle mode to optimize wear and tear of system when more than one outdoor unit is connected to a circuit. Outdoor units must also be equipped with four-way valve for necessary provision of heating during winters. All outdoor shall have approximately following as per OEM standards rated capacities at ARI conditions and, with the criteria of delivering 95% capacity at 43 C being most likely temperature to occur during summers. (All Unit shall confirm the detailed specification of tender document and providing power/ control cabling/earthing of indoor unit complete with supplying of all material in all respect as per specifications and any other items required to make the system complete as required). MAKE: MITSUBISHI, FIJITSU GENERAL, DAIKIN | ||
| 3 | 42 HP Heating and cooling Top Discharge | 2.000 | Nos. |
| 4 | Indoor Unit | ||
| 5 | Supply, Installation, Testing and Commissioning of VRV/VRF Cassette type indoor units with factory fitted electronic expansion valve, multi speed fan motors, dynamically balanced blowers, synthetic washable plasma media filter with hydrophobic coating on cooling coil. Electronic components like PCBs must be essentially enclosed in a metal box compartment being integrated part of indoor unit to ensure enhanced fire protection with auto by pass technology allowing uninterrupted operation of indoor units connected to a circuit in event of break down in any indoor connected to same circuit. All indoor units shall have individual fan speed and temperature control mechanism to be operated from corded remote. In addition to all indoor units can also be operated from central remote control. (All Unit shall confirm the detailed specification of tender document and providing power/ control cabling/earthing of indoor unit complete with supplying of all material in all respect as per specifications and any other items required to make the system complete as required). MAKE: MITSUBISHI, FIJITSU GENERAL, DAIKIN |
6 Days Left