Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3775536 |
|---|---|
| Organisation Name | Shri Amarnathji Shrine Board |
| Tender Brief | Repairs To Administration And Outsourced Huts (81-92, 93-104, 1a-8a, M/hall, Kitchen, Dining) And Departmental Accommodations. |
| Last Date For Submission | 27th Mar, 2026 |
| Opening Date | 28 Mar, 2026 |
| Document Cost | 944.00 |
|---|---|
| EMD | 16000.00 |
| Estimated Cost | 800000.00 |
| City | Srinagar |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing and fixing PVC panelling 6mm to SP Line rooms and washrooms of approved brand and make including all necessary fittings and accessories including carriage complete. (All Quantities subject to actual measurements at site) | 250.00 | sqm |
| 2 | Providing and fixing one piece white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter flushing cistern and CP flush bend of approved brand and make with overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: including carriage: W.C. pan with ISI marked white solid plastic seat and lid (All Quantities subject to actual measurements at site). | 6.00 | No. |
| 3 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer including carriage (All Quantities subject to actual measurements at site). | 5.00 | No. |
| 4 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings including carriage (All Quantities subject to actual measurements at site). | 5.00 | No. |
| 5 | Providing and fixing pre-coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm+/-5% total coated thickness (TCT), Zinc coating 120 gsm as per IS:277 in 240 mpa stee grade 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling/ self tapping screws of size (5.5 x 55 mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. including carriage (All Quantities subject to actual measurements at site). | 240.00 | sqm |
7 Days Left