| 1 | Earthwork in excavation by mechanical means for foundation, footings, walls, retaining walls, rafts, trenches, drains, lift pits, underground sumps, tank, septic tanks, soak well, Box cutting etc. including dewatering the sub-soil water from any source and rain water to keep the excavation dry, removal of slush, dressing of sides and ramming of bottoms, planking, shoring and strutting, removal and disposal of surplus excavated material with all lead and lift. including compaction by using mechanical plate compactor or vibro roller, finished to desire levels all as per excavation plan and foundation drawings to get Modified Proctor Density test (MPD) of 95Percentage., work including mechanical transport inclusive of royalty, statutory fees all permissions and any other incidental expenses etc. complete. i)sorting out and stacking of useful materials and disposing off the excavated stuff with all lead. Up to 1.5 Mtr Depth (C) Hard Murrum | 77.760 | Cu.mt |
| 2 | Providing and fixing pre-cast Rubber Dye or steel Dye inte locking concrete block 60mm thick with grade of concrete M300 pnumatic compressed or vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines ofn IRC : SP 63-2018 etc. Complete. all materials, loading, unloading, transportation, placing at all floors and for all leads, at all floors, all levels, all heights and all shapes, all accessorie, protectiion sheet etc. work complete as per the detailed drawing, approved sample and instruction of ArchitectorEIC. | 288.000 | sqmt |
| 3 | Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formworkin (A) Foundation and Plinth all materials, loading, unloading, transportation, placing at all floors and for all leads, at all floors, all levels, all heights and all shapes, all accessorie, protectiion sheet etc. work complete as per the detailed drawing, approved sample and instruction of ArchitectorEIC. (minimum cement consumption 170 Kgorcmt) | 30.820 | cumt |
| 4 | TOTAL-06 Nos solar Parking Shade 1) 11kw solar parking shade system-02Nos -LOCATION-(Wandh-Guniyasr Mines and Roha-Kotda Mines ) (DCR PV module only) 2) 5.5kw solar parking shade system-04Nos -LOCATION-(Daban Mines ,Ratadiya Mines,Naredi Mines,Mothalaa Balachod Mines, ) (DCR PV module only) Supply, Installation, Testing and Commissioning of following size of Grid Tied Solar Power Plant with Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy Frame With Twin Wall Profile, Front Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy Frame With Twin Wall Profile, Front Cover : High Transmission Low-Iron Tempered Glass (AR Coated), High efficency and positive power tolerance Pmax: 0or+5,Module Efficiency should be approx. 18Percentage-21Percentage, Normal operating temperature 45'C, Junction Box with Waterproof IP67 and MC4 Compatible and Enclosed with Bypass diodes, 100Percentage Electroluminescence test to ensureerror free Modules, Thep. temp. co-efficient of the PV module shall equal or better than -0.45Percentageordegree C. Solar PV modules of minimum fill factor 75Percentage to be used. Unit Production:- 4 to 5 Unit orkw orday (Actual)(1Year Avg) With 10 year Product warranty and 25 year Linear Power Warranty.Solar Inverter: MPPT Range: 80-1000 V, Max efficiency: 97.5Percentage - 98.9Percentage, Oorp Frequency: 50or60Hz, Operating Altitude (m) 4000, Oorp Power Factor: ~1, OorP THDi: | 44.000 | per KW |
| 5 | Fabricated work: Providing Fabrication and erection of Steelstructure as per drawings including materials, consisting of plates, rolled Steel joists, channels, angles, chequered plates etc and also rectangular or square hollow Steel sections, insert plates in RCCorBrickwork, anchor bolts for Steel structure, sleeve pipes, anchor nuts, washers etc, straightening of raw steel if required, fabrication of steel structures with primer of zinc oxide and minimum two coats of anti corrosive matt finish paint including preparation of supplementary sketches and detailed bill of materials supply of bolts, nuts, washers, shims, packs, putty. gas, welding electrodes and all other consumables, as required and carrying out surface preparation all complete. The scope includes loading, transportation ,unloading and delivery and erection site of all fabricated structures,, alignment and welding of all structures true to line, level, plumb and dimension, including rectification if any, splicing, site assembly all as per technical specifications and drawings, ,all complete. Contactor shall provide stability certificate for the fabrication structure. Rate inclusive of shop drawing. work completed including mock up sample, all materials, loading, unloading, transportation, placing at all floors and for all leads, at all floors, all levels, all heights and all shapes, all accessorie, protectiion sheet etc. work complete as per the detailed drawing, approved sample and instruction of ArchitectorEIC. | 3663.790 | Kg |
