Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4952867 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repairs To Roof Treatment And Rectification Of Seepage Leakage And Certain Allied Works In Certain Buildings At Vrde Ahmednagar |
| Last Date For Submission | 11th Aug, 2026 |
| Opening Date | 13 Aug, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 50000.00 |
| Estimated Cost | 2500000.00 |
| City | Ahmednagar |
|---|---|
| State | Maharashtra |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Dismantling asbestos cement sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 meters lead complete all as specified and directed. | 385.00 | SQM |
| 2 | Dismantling wood work of sectional area below 40 square centimeters in frames, trusses, purlins and rafters up to 10 meters span and 5 meters height including stacking the material within 50 meters lead complete all as specified and directed. | 240.00 | RM |
| 3 | S & F for precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metere or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete all as specified and directed. | 350.00 | SQM |
| 4 | S & F for precoated galvanised steel sheet roofing accessories - Ridges plain(500-600mm) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete all as specified and directed. | 35.00 | RM |
| 5 | M & L for Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete all as specified and directed. | 1080.00 | KG |
6 Days Left