Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4276603 |
|---|---|
| Organisation Name | Maharashtra State Seed Corporation Limited |
| Tender Brief | Corrigendum : Calling Rates For Providing And Fixing Ppgi Sheet, Heat Insulation Polynum Sheet And Transparent Sheet For Godown At Various Locations Of Msscl In Maharashtra. |
| Last Date For Submission | 20th May, 2026 |
| Opening Date | 21 May, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 0.00 |
| Estimated Cost | 0.00 |
| City | Akola |
|---|---|
| State | Maharashtra |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | PMW | ||
| 2 | Providing & Fixing Metacolour sheets PPGI (PRE PAINTED GALVANIZED IRON SHEET) with colour coated sheet top side offwhite/pure white and bottom side gray colour as usual. In every bay of 5 meters provide white colour sheet and after 5 meters interval provide 2 green or Blue colour sheets at every bays alternately if possible. The PPGI sheet should be of trafford corruagted profile sheet of 0.70 mm thickness having unit weight (5.45 Kg per Sqm. to 5.70 Kg per Sqm.) FOR ROOFING AND VERTICAL CLADDING including crimpings sheet with fixing by self drilling tapping threaded screws having locking arrangment with nuts and rubber washers as per standard drawing and design, fixing nut bolts by electric drilling machine in line and level, with required scaffolding, lifting mechanism, hoisting etc. complete. as directded by engineer in-charge (work is at approximately 15 meters height.) (Quantity shown in shedule-B is approximate quantity while placing the order of metacolour PPGI sheet 0.70mm thick contractor should take the actual measurments of godown roof area for execution of work) (Make-JSW/AMNS/Tata) (Spec No. As Directed By Engineer Incharge) | 1.000 | Bag |
| 3 | Providing & fixing polynum heat insulation sheet 4mm thickness material having detail properties such as Emmissiuty 3%, reflectivity 97%, heat resistance 16%, scratch resistant both sides, thickness 4.00mm, close cell clear PE bubble cover both sides with atleast 8 micron thickness anticorrosive alluminuium foil both sides, this heat resistant material is to be fixed at the roof level below Metacoloursheet PPGI sheet between purlins and sheet fixed with sealent & jointing it with bitumnus alluminuium tape, water proof jointable silicon sealent material as directed by engineer-in charge with necessary self taping, drilling threded screw fitting with GI Wire16 gauge @ 0.20 meter, center to center on lenth & diagonal at every purline bays side etc. complete as directed by engineer-in charge. (work is at approximately 15 meters height.)(Quantity shown in shedule is approximate quantity while placing the order of polynum sheet material contractor should take the actual mesurment of godown roof area for execution of work) (Spec No. As Directed By Engineer Incharge) | 1.000 | Bag |
| 4 | Providing and fixing Transparent Polycarbonate sheet 2mm thick, 3.60m x 1.10m width for covering area in arrangment over the existing roof including cutting of sheets proper fixing in positon to true line and level with all fixtures and fastenings so as to water proof joints with approved silicon sealent making leak proof roof surface including cleaning, cutting, metacolour sheet with required size etc complete with allide required structure steel work etc complete as by Engineer charge, (work is at approximately 15 meters height.) | 1.000 | Bag |
Closed