Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4249343 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | General-health Department - Annual Plan 2023-24 - Implementation Of Plan Scheme Developing Super Speciality Facilities - Various Electrical Works In Super Speciality Block (4th Floor)- A A Rahim Memorial District Hospital Kollam-electrical Lift Work |
| Last Date For Submission | 21st May, 2026 |
| Opening Date | 25 May, 2026 |
| Document Cost | 2760.00 |
|---|---|
| EMD | 50000.00 |
| Estimated Cost | 3016949.00 |
| City | Alappuzha |
|---|---|
| State | Kerala |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Installation of Lift | ||
| 2 | OD18059/2025-2026:Supply Installation Testing and Commissioning of Bed cum Passenger , Gearless Machine Room less Lift with the following 1). Load / Persons : 1224 Kg. / 18 persons 2) .Rated speed : 1M/Sec. 3). Travel : 18 Mtr ( Approx) 4). No. of entrance served: 5 stops and 5openings 5). No. of floor served : Five floors 6). Method of control : Micro processor based V3F with ARD system. 7). Size of lift well : 1800 mm (W)X 3000 mm(D) available 8). Car Size: 1300 (W) x 2200mm (D) x 2100mm (H) 9). Car entrance: As per sire requirements 10). Leveling accuracy : As per IS 11). Car door opening : As per IS 12). Drive : Variable voltage variable frequency (V3F) 13) .Operation : Simplex full selective collective control with ON/OFF switch 14). Construction of design and furnishing of car body work: Vandal proof Stainless steel (SS304,make:Tata/Jindal) finish cabinet with Scratch proof Stainless steel door (sheet 1mm thickness), Stainless steel mirror finish ceiling, Aluminium 3mm minimum thickness anti skid flooring, fan with timer cut-off, push to talk, LED display, LED light, hand rails and floor announcement system. All buttons in car and all landings should have Braille sign. 15). Landing entrance : Automatic centre /Telescopic opening Door 4/6 Panel 1100mm Wx 2000mm H, with Vandal proof stainless steel sliding door with half portion Glass Door as per ISS with provision for mechanical opening key for emergency with full length infra red light curtains and half framed fire rated glass door for minimum 2 Hrs. 16). Call and position indicators : Up/down direction & position Dot Matrix LED indication shall be provided at all landings 17). Electric supply : 1) Light 230/50C/s single phase 2 wire system. 2) 415V 50C/s 3 phase 4 wire system. 18). Infra red door opening system: To be provide for entire length of the door 19). Automatic Rescue Device :Provide automatic rescue device with an electronic controller powered by maintenance free batteries with capacity for minimum four rescue operation at full load . The rescue operation should act within 10 seconds of power failure 20). Regulation : 350V- 450V (SMPS based) 21). Indication in the car : a) Car position b) Call indicator c) Door close/open push button d) Emergency stop button e) Flush mounted switch for fan and light f) Non stop button g) Battery operated emergency lamp with rechargeable batteries. h) Battery operated alarm bell i) Intercom wiring with one master unit with two slaves j) Fireman switch at main lobby k) Auto attendant control (inside the car) 22). Winding handle Manual winding handle for use in emergency. 23). Safeties a) Over speed governor, operated safety gear b) Buffers c) Motor over load and under voltage protection d) Phase reversal protection e) Other safeties as per ISS f) Single phase preventer g) Final limit switch 24). Leveling. Automatic leveling at all landing as per IS. 25). Control panel : Control panel will be dust and vermin proof of sheet metal enclosure 26). Announcement System: To provide lift announcement system 27). Tests :At site test as per IS to be carried out and approval from Electrical Inspectorate before Handing over. 28). Scope of work:- a) Supply of lift materials b) Minor / required civil works, including core cutting, channels, angle irons, MS plates, minor plastering, cutting pockets and grouting brackets for the guide rails, grouting boxes for control units, white washing of lift well etc as required c) Scaffolding d) Door frames e) Supporting steel f) Temporary electric supply for installation of lift. Electric supply for testing and commissioning of lift is to be arranged by the firm on their own account. g) Intercom facilities with one master and two slaves h) Battery operated alarm i) Obtaining Scheme approval as well as energization Certificate from the electrical Inspectorate including preparation of necessary drawing for the same. inclusive of necessary fee to the Inspectorate and first year insurance as per new lift rule by the firm for which no refund will be made from the department including taking insurance for one year as per new lift rule. j) Supply of book let with complete details of maintenance schedule and control diagram. k) Giving training to department staff for attending trouble shooting 28). Guarantee: Company shall carry out free maintenance and service during warranty period which also includes a) Cleaning lift equipment b) Lubrication of all moving parts c) Replacing of lubricating oil when required d) Checking and adjusting contacts e) Replacing fusible item alarm etc. f) Recharging batteries in case of drain/ renewing batteries g ) Replacing /rewinding of all defective parts of the lift including motors and V3F unit. | 1.000 | each |
9 Days Left