Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3895835 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Ca No Ge(n)amb-71/2025-26 Provn Of Aluminum Door And Upgradation Of Dh Of Building No Ht-6 Haig Line And Addn/altn To Md Accn At Joginder Singh Lines Of Age B/r-ii Of Ge (north) Ambala Cantt |
| Last Date For Submission | 22nd Apr, 2026 |
| Opening Date | 24 Apr, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 79580.00 |
| Estimated Cost | 3979000.00 |
| City | Ambala |
|---|---|
| State | Haryana |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Schedule 'A' Part-I (B/R itmes) Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) and removing old tar felt/APP, all loose dirt, cement plaster, cleaning the concrete surface including removal & cleaning of vegetation, fungus, moss small trees etc from the roof top with wire brush and washing the roof surface with water to remove all dirt, dust, mud etc complete all as specified and directed. | 49.00 | Cubic metre |
| 2 | Material & Labour cutting grooves in brick wall, for inserting App membrane, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 or PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) , ,complete all as specified and directed. | 200.00 | Running metre |
| 3 | Material & Labour cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) , ,complete all as specified and directed. | 200.00 | Running metre |
| 4 | Material & Labour PCC (1:2:4) type B0 using 12.50 mm graded stone aggregate as in mass concrete over roof as in padding incl cement slurry @ 3Kg/Per sqm over old RCC surface of roof surface finished even & smooth without using extra cement. ,complete all as specified and as directed. | 49.00 | Cubic metre |
| 5 | Material & Labour for providing and laying 3mm thick APP (atactic polypropylene polymer) modified prefabricated five layer weight not less than 3.60 kg /Sqm water proofing membrane black finish reinforced with non woven polyster matt and consisting of a coat bituminous primer @ 0.40 litre /Sqm by the same membrane manufactures of density 0.87 to 0.89 kg/ltr at 25 degree centegrate temperature and viscosity 70 160 cps over the primer coat with overlap of 100mm at the side and 150mm at the end, the layer membrane shall be laid using butane gas torch and sealing all joints etc. after preparing the surface complete as per standred practice as per manufacture's instructions. The vital physical and chemical parameters of the membrane shell be under : (i) Joint strength in longitudinal and transverse direction at 23 degree centegrate at 650/ 450 N /5 cms (ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane not less then 150 degree centegrate when tested in accordance with ASTM (d 5147) (iii) The laying of membrane shell be got down through the authorised applicator of manufactures of membrane only , complete, all as specified and as directed. (iv) The work shall be carriout at a height upto 12 metre. | 700.00 | Square Metre |
6 Days Left