Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4572574 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Cwe/af Amb/amb-t03/2026-27 Provn Of Borewell In Tech Area At Af Stn Ambala Under Ge(af) Ambala |
| Last Date For Submission | 20th Jul, 2026 |
| Opening Date | 22 Jul, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 84820.00 |
| Estimated Cost | 4241000.00 |
| City | Ambala |
|---|---|
| State | Haryana |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Material & Labour for drilling trial bore by rotary / reverse rotary method in any type of strata consisting of 250mm dia drill bit for depth upto 400 mtr in sequence from ground level as given below for borewells complete as per IS -2800 (Part -1):1991(Reaffirmed 2001). The following test and reporting will be carried out by the contractor and approved by GE complete all as specified & directed:- (i) Recording the water bearing horizon. (ii) Taking the samples from the bore well cutting for every 3mtr interval and every change in strata if less than 3 mtr. (iii) Preparation of litho logs based on these samples. (iv) Drill time log to be prepared and prescribed Note: - The depth of trial boring of the tube well at the site indicated by the GE is anticipated to be 350 mtr below ground level. The depth may, however, be ordered in writing to be varied by the GE up to a maximum of 25 % of the above mentioned depth (plus or minus). If the GE decided that suitable water bearing strata is not available in the aforesaid bore or the boring cannot be continued further on account of the type of strata met with, he may order the contractor to bore at other site(s) selected by the GE, until suitable water bearing strata is met with or boring cannot continue further on account of the type of strata met with provided the total number of bores (including the first bore) does not exceed two Numbers the decision of the GE shall be final & binding .The bore well work shall be start only after successful result of trail bore and approved by GE. | 350.00 | RM |
| 2 | Material & Labour for development of trial bore to be drill by using suitable size of bit to accomodate 250 x 200 mm dia assembly pipes leaving 5" annular space around assembly pipes from 250mm to 675mm upto 60 mtr from ground level, complete all as specified & directed. | 60.00 | RM |
| 3 | Material & Labour for development of trial bore to be drill by using suitable size of bit to accomodate 250x200 mm dia assembly pipes leaving 5" annular space around assembly pipes from 250mm to 525 mm from exceeding depth of 60 mtr but not exceeding 200 mtr below ground level, complete all as specified & directed. | 140.00 | RM |
| 4 | Material & Labour for development of trial bore to be drill by using suitable size of bit to accomodate 250x200 mm dia assembly pipes leaving 5" annular space around assembly pipes from 250mm to 525 mm from exceeding depth of 200 mtr but not exceeding 300 mtr below ground level, complete all as specified & directed. | 100.00 | RM |
| 5 | Material & Labour for development of trial bore to be drill by using suitable size of bit to accomodate 250x200 mm dia assembly pipes leaving 5" annular space around assembly pipes from 250mm to 525 mm from exceeding depth of 300 mtr but not exceeding 400 mtr below ground level, complete all as specified & directed. | 50.00 | RM |
6 Days Left