Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 5627564 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | Corrigendum : Bt Patch Repair Work Of 1. Sontarai Via Bhusu Gersa Road 2. Batouli Bhutko Chirga Road 3. Karouli Sakhouli Road 4. Dhourpur Dumardih Road 5. Patora Nagam Road 6. Dumardih Chitarpur Road 7. Silsila Askala Road 8. Semardih To Bakila Road 9. Chermunda To Deori Road 10. Kot Approach Road. Under Pwd Sub Division Sitapur (first Call) |
| Last Date For Submission | 30th Sep, 2026 |
| Opening Date | 06 Oct, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 36638.00 |
| Estimated Cost | 4885000.00 |
| City | Ambikapur |
|---|---|
| State | Chhattisgarh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Filling Pot-holes and Patch Repairs with Wet Mix Macadam (WMM) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, spreading by mechanical or mannual means as per size of the patch on well prepared surface and compacting with vibratory roller to achieve the desired density.as per clause 406 | 455.94 | cum |
| 2 | Prime coatProviding and applying primer coat with oil based bitumen emulsion (SS-1, grade confirming to IS:8887) on prepared surface of granular base including clearing of road surface and spraying primer using echanicalmeans as per clause 502.(i) on WBM / WMM surface @0.85 kg/ sqm. | 2,550.00 | Square Meter |
| 3 | Tack coat Providing and applying tack coat with bitumen emulsion (RS-1, grade confirming to IS:8887) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per clause 503. (ii) Granular surface treated with primes @ 0.30 kg / Sqm | 2,550.00 | Square Meter |
| 4 | Providing and laying leveling course / profile corrective course with bituminous macadam With minimum 40-60 TPH capacity hot mix plant using crushed aggregates of Grading-1 premixed with bituminous binder @ 3.1% transported to site and laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clause-501.6 and 501.7 to achieve the desired compaction complete in all respect and as per relevant clause section 500. B With Mechanical paver | 127.50 | cum |
| 5 | Close Graded Premix Surfacing/Mixed Seal Surfacing Mechanical means using minimum 40-60 TPH capacity of HMP. Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness using bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade, complete as per clause 508. II. With mechanical paver finisher A With bitumen ii) Type B ( 13.2 mm to 0.09 mm size aggregates ) | 2,550.00 | Square Meter |
Closed