Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4630367 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Smart Periodicals Services For Various Bldgs At Af Stn Amritsar |
| Last Date For Submission | 13th Jul, 2026 |
| Opening Date | 20 Jul, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 19998.00 |
| Estimated Cost | 999900.00 |
| City | Amritsar |
|---|---|
| State | Punjab |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Taking down cement or cement lime plaster, any description on brick or concrete surfaces of walls,ceiling etc and complete removal of lime wash if any ,including raking out joints, hacking for key, scrubbing down with water, etc completed all as specified. | 400.00 | Sqm |
| 2 | Material and labour for 15 mm thick cement plaster with ready mix mortar of approved make on brick workl/stone/concrete wall , facia , projection,chajja etc external surfaces finished even and smooth without using extra cement on brick or concrete surface of walls,slabs & chajja finished even and fair for a building of height upto 7.5 meter including necessary scaffolding all as specified and directed by Engr-in-Charge . | 300.00 | Sqm |
| 3 | Material and labour for 12mm thick cement plastering in cm 1:6 on brick or concrete surfaces other, finishing the surface fair and even complete all as specified and directed by engineer in charge | 100.00 | Sqm |
| 4 | M&L for chipping off/ taking down the spalled and old concrete from RCC members i.e RCC columns , beams ,slabs ,chajjas etc on external and internal surface for application of micrococrete upto height of 7.5 m complete all as specified and directed by Engr-in-Charge . The follwing steps are to be followed - i) Cleaning of rusted bars to be done with wire brushes or sand blasting till complete removal of rust , after this coating of existing reinforcement bars shall be done by applying protective anti-corrosive zinc primer of fosroc or equivalent make with coverage as per technical specifications of manufacturer. ii) Application of epoxy bonding agent on the surface before application of micro-concrete. iii) Mechanical application of micro-cocrete material comprising of 10mm down graded aggregate chips to be mixed in a mechanical slow speed mixer . The mixed material shall be placed immediately in to the position, properly with out any time gap complete for an average thickness 25 mm including finishing the surface even and smooth, complete all as specified and directed by Engrs -In-Charge. Note- i) Work shall be executed by certifed applicator of approved make. ii) Primer , bonding agent and micro- concrete matrial shall be of same make . ii) Cost of scaffolding shall be included the qouted rate no extra amount will be paid for this . Make :- Fosroc , Sika , Dr. Fixit . | 60.00 | Sqm |
| 5 | Matenal and labour for preparation of newly plastered wall surface and applying two or more coat of first quality premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance of Asian Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 tr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied lover one coat of acrylic water based exterior grade primer @ 0.9ltrundiluted)/10 sq mirs diluted with water in 1:1ratio as per manufacture's instruction and all coats incl primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 It per minute having a pressure of 3300 PSI along with application of wallcare putty of 1mm thickness upto height of 12.00 mtrs all as specified and directed by engineer in charge . Note :- Allow 6-8 hrs to dry the surface in subsequent coats of primer and distemper and including necessary scaffolding at any height complete all specified and directed by Engr-in-Charge. | 300.00 | Sqm |
12 Days Left