Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4072250 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | Providing Sound System In Sangat Hall At Bhagwan Valmiki Tirath Sthal At Ram Tirath, Distt Amritsar |
| Last Date For Submission | 5th May, 2026 |
| Opening Date | 05 May, 2026 |
| Document Cost | 10000.00 |
|---|---|
| EMD | 273210.00 |
| Estimated Cost | 13660410.00 |
| City | Amritsar |
|---|---|
| State | Punjab |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | SITC of 2-way full range all weather Line Array Loudspeaker,Having line Array Stackable Cabinet L.F, 1 x 14 or hIGHER 1 x 1.4 or higher Horn loaded Compression Driver,750 watt or lower Continous RMS Power,2000W or Higher Peak Power, 8 ohms, Frequency Response(-10db) 55Hz or Lower and 18khz or Higher, Average Sensitivity - 98dB or higher, Max SPL Peak 135 db or higher, Horizontal Dispersion 60 or higher,Vertical Dispersion 25 or Higher,The Speaker cabinet Should be of IP 55 or higher Rated ,Powder-coated aluminum or Stainless Steel grille,UV-resistant and should have all Corrosion-resistant Components.Complete in all respects as approved and desired by the Engineer in-charge at site. | 21.000 | Nos |
| 2 | SITC of Powder coated Mild Steel Line array hanging Bracket KIT. Complete in all respects as approved and desired by the Engineer in-charge at site. | 1.000 | Set |
| 3 | SITC of Professional Grade Four channel or Higher Power amplifier Having Power 4 x1200W @ 8 ohms at Each Channel or Higher, 4 x 1200W @ 4 ohms or higher Each Channel or Higher, Frequency Responce - 20Hz - 20kHz, , Input Impedence - 20k ohm , Crosstalk - >65dB or Higher, S/ N ratio - >101dB or Higher, Damping Factor - 800, THD - < 0.1% or Lower.Complete in all respects as approved and desired by the Engineer in-charge at site. | 3.000 | Nos |
| 4 | SITC of Digital signal processor Having 16 inputs or higher(atleast 8 Analog inputs + 8 Digital Inputs) , 16 outputs or Higher (Atleast 8 Analog outputs + 8 Digital outputs), Should Have Matrix DSP routing for all inputs and outputs,Should have Dante connectivity for Inputs and Outputs ,Should Have 32bit or higher floating point processor,24bit/48KHz or Higher sampling rate,In-built USB sound card for USB recording and soft video Conferencing Codec,Acoustic Echo Cancellation (AEC) 8x8 or higher Low pass & high pass filters and limiter on output channels,8-way GPIO (General purpose input output) configured as inputs or outputs, allowing for flexible control of digital signals,Ethernet, RS232/485 control interface for third-party control, Frequency Response 20Hz - 20kHz, 0.3dB,Input Dynamic Range 110dB or higher,Output Dynamic Range 112dB or higher,,Input Impedance 5k or higher Output Impedance 100 or higherComplete in all respects as approved and desired by the Engineer in-charge at site. | 1.000 | Nos |
| 5 | SITC of Handheld Microphone system having UHF Wireless Cardioid dynamic handheld microphone system with Frequency Response of 100 Hz or lower to 15 kHz or higher (+1 dB, -3 dB) , 60 dBA or higher S/N ratio, Total Harmonic Distortion <1.0% or lower (at 1 kHz, 20 kHz deviation) , Dynamic Range 110dB or higher , Should have on/off switch, and have operating range 100 mtrs or higher , Multiple band with 10 or higher channels on each band ; maximum Output level XLR / Balanced: +9 dBV or higher & 6.3 mm ( "") / Unbalanced: +4 dBV or highercomplete in all respects as approved and desired by the Engineer in-charge at site. | 2.000 | Nos |
11 Days Left