Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3932575 |
|---|---|
| Organisation Name | Public Health Engineering Department |
| Tender Brief | Corrigendum : Construction Of 200mm Dia Production Well By Odex Method At Kasnard Pannard Sangnard Well No. 2 District Anantnag. |
| Last Date For Submission | 4th May, 2026 |
| Opening Date | 05 May, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 63700.00 |
| Estimated Cost | 2123000.00 |
| City | Anantnag |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Cost on account of hiring charges of Hydro geologist/Geologist by firm for ground water feasibility survey and furnishing of geologists report to the department. Job also includes resistivity test by latest equipement. For identified site and susequently furnishing of report to the depatment before construction of Production well is taken in hand by the firm. | 1.00 | Job |
| 2 | Boring/drilling of bore well of required dia and simultaneous lowering of casing/strainer by DTH/ODEX method prescribed in IS: 2800 (part-I), by fixing case drive shoe including collecting samples from different strata chart/bore log, including hire and running charges of all equipment tools, plants and machineries required for the job, all complete as per dicrection of Engineer-in-charge beyond 90m depth below ground. All kinds of starta (Diameter of casing/stariner pipe = 200mm) | 90.00 | Mtr |
| 3 | Boring/drilling of bore well of required dia and simultaneous lowering of casing/strainer by DTH/ODEX method prescribed in IS: 2800 (part-I), by fixing case drive shoe including collecting samples from different strata chart/bore log, including hire and running charges of all equipment tools, plants and machineries required for the job, all complete as per dicrection of Engineer-in-charge beyond 90m depth and upto 150m depth below ground level. All kinds of starta (Diameter of casing/stariner pipe = 200mm) | 60.00 | Mtr |
| 4 | Supplying and assembling in bore well, ERW (Electric resistance welded) Fe 410 mild steel, screwed and socketed/plain ended casing pipes of required dia, confirming IS: 4270 of reputed and approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture including required hire and labor charges, fitting and accessories, all complete for all depths as per direction of Engineer-in-charge 200mm nominal dia. having wall thickness of 7.1 mm (as per IS code) | 150.00 | Mtr |
| 5 | Development of tube well in accordance with IS: 2800 (part-I) and IS: 11189 to establish maximum rate of uasble water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by V -notch method or any other approved method, measuring static level and draw down etc. by step draw down method, collecting water samples and getting tested in approved laboratory, i/c disinfection of tube well, all complete including required hire and labour charges of air compressor, tools and accessories etc. all as per direction of Engineer in-charge. | 1.00 | Job |
10 Days Left