Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 5025917 |
|---|---|
| Organisation Name | Irrigation And Flood Control Department |
| Tender Brief | Electrical And Mechanical Components For Lis Phase 1st Stage 2nd Khudpora |
| Last Date For Submission | 10th Aug, 2026 |
| Opening Date | 11 Aug, 2026 |
| Document Cost | 200.00 |
|---|---|
| EMD | 13000.00 |
| Estimated Cost | 650000.00 |
| City | Anantnag |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Fabrication ,Providing and fitting of aluminium bus bars arrangement for 3-Nos outgoing feeders of L.T panel ,the bus bar shall be of size 80mmx10mm connecting all the 3-phases of Panel/ ougoing feeders (3nos) to respective Stabilzers and starters inside the pump house ,all the three circuits of the bus bars shall have to be carried along the wall of the pump house with the help of angle iron brakets of suitable size as below. All bus bars shall be provided with insulated fingers and insulating sleeves at all exposed ends, joints, openings, and holding locations to ensure complete electrical safety and compliance with applicable standards. The ends of the bus bars shall be drilled to accurate holes as per the requirement. The bus bars shall have to be fitted as per the site requirement including fabrication of teminals and shall be provided with busbar sleeves in (Red,Yellow and Blue colours) for their proper insulations as well as bending of the bus bars as per the site requirement by using gas torch which further includes providing and fitting of all sorts of the screws, nuts etc. The job also includes providing and fitting of baklite sheets/strips at the place of resting on brackets. | 135.00 | Meters |
| 2 | Fabrication, providing and fitting of brackets for holding and supporting bus bars fabricted out of ISA 35x35x5 of size (2 x 2 feet x 2.5 ft diagonal/cross) fitted with all mountings/accessories as mentioned . The brackets shall be fitted on the wall properly/firmly. The job includes applying a primer coat. | 16.00 | No |
| 3 | Providing and fitting of single core unarmoured ,XLPE Aluminium Cable of 630sq-mm size for internal connection of electrical gadgets from stabilizers to starters to motors. The cable shall be provided and fitted with suitable size aluminium thimbles /lugs ,to its terminal duly crimpled with hydraulic crimpling tool the job includs providing and fitting of other fitting material like copper terminal bus bar , nuts,bolts and washeers. | 119.00 | Meters |
| 4 | Providing, fitting and testing of 165AH tubular lead acid battery of reputed make along with 1100W inverter/UPS device (Luminous/Genius/Lev Guard/Exide/Amaron ) for charging and supply. The job includes all fitting, wiring for complete circuiting, connecting and installation of above inverter battery and providing four number lightening points with control switches and two number charging point including wiring, pvc conduit/chanel etc. The Job also includes providing and fitting of 4 no 10W LEDS. | 1.00 | Job |
| 5 | Providing and fitting of Cleats to exisiting joints. The cleats shall be made out of 45x45x5mm angled iron of each 6 inch in length. Three number of cleats shall be fitted per joint for strengthening of joints. | 130.0 | Joints |
20 Days Left