Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4857238 |
|---|---|
| Organisation Name | Irrigation And Flood Control Department |
| Tender Brief | Providing, Fitting , Testing And Commissioning Of Various Electro-mechanical Components For Lis Braw Bandina |
| Last Date For Submission | 28th Jul, 2026 |
| Opening Date | 28 Jul, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 18000.00 |
| Estimated Cost | 900000.00 |
| City | Anantnag |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Manufacturing, Supplying, Installing, commissioning and testing of 100 KVA Capacity Copper wound voltage stabilizer at site. The stabilizer shall be manually operated, oil cooled suitable for working on 3 phases 50+ 3% HZ AC voltage. The core shall be contained in a rectangular container made out of 2mm thick Mild Steel plate. The container has to be painted in two coats of steel primer both inside and outside and with two coats of super enamel paint of grey shade outside the container. The box shall be provided with suitable cooling pipes/fins to dissipate the heat generated. Lifting hooks of proper size for lifting stabilizer shall be provided on the top of the tank. The container of the stabilizer shall be mounted on wheels for easy shifting/positioning as and when required. Copper Strips of suitable size shall have to be used for winding and fibre glass insulating material shall be used for insulating of copper strip. The core of the stabilizer shall be fabricated out of first class silicon 92 grade pota sheets cut to the size and then tightened securely. The stabilizer shall have suitable insulated lugs of appropriate size of cable connection. The indicating glass of the transformer oil shall be provided on the stabilizer body. Specifications. Voltage Range = Input = 180-440 volts Output = 400/440 volts Tape Changer = Manually operated balance type changer of 8 tapings with tape position Indicator. Tape No: - 1 =Step down by not more than 50 volts. Tape No: - 2 = line voltage. Tape No: - 3-8 =These tapes shall be used to increase voltage in the range of 180-440 volts to 400-440 volts The stabilizer shall be provided with a free standing type control panel made out of sheet metal dust and vermin proof internally wired having following accessories. a). Two number voltmeter 100 mm square Digital type 0-500 volts, of, one each on incoming and outgoing circuits. The voltmeter is with fuse and selector switch for 3 phase. b). A set of indicating lamps for 3 phase complete with fusing both in primary and secondary side of the transformer. c). Red and green lamps for OFF/On display. The stabilizer shall be filled with fresh transformer oil up to the required level. All the accessories and meters shall be of reputed make and to confirm relevant ISI standards. The voltage stabilizer is to be tested on full load for maximum hours at site.The Job includes providing and fitting of 70 sq.mm copper cable(10 meter) with required number of copper lugs of size 70 sq.mm Manufactures test certificate shall be provided with the Stabilizer. | 3 | Job |
| 2 | Providing, installation and testing at site 100 HP capacity fully automatic auto transformer starter. The starter shall comprise of fitment of the following equipment and accessories. a). Main contactor assembly of L&T/Telemechnique /ABB make having capacity of 250 Amp. b). Delta contactor assembly of L&T/ Telemechnique/ABB make having a capacity of 150 Amp. c). Auto transformer contactor assembly of L&T/Telemechnique/Havells having a range of 250 Amp d). Thermal overload relays of MN series of suitable Capacity e). Double vacuum timer assembly having time range of 0-60/sec. Barat Batlar Hamar make. f) Single phase preventer of L&T make/Minilac make for above capacity starter. g). Auxiliary fuse units of suitable ampere range. h). Electrolytic copper bus bar strips of suitable size of duly tinned air insulated mounted on suitable size backlit insulators. i). Three no. current transformer coils with a range of 0-50 Amp. Of L&T/AE make fitted in each bus bar strips connected to 96x96mm square. Flush type amp. Meter of AE/L&T make fitted on the door of the housing. Each phase shall indicate the amp range by having one number selector actuator fitted. j). One number voltmeter of AE/L&T make 0-500 volts with one selector suitable for cut showing voltage in each phase. k). On/Off push button actuator of red and green colors of 5A-415 volts 50 HZ suitable for cut out, dia. of 30mm. l). Complete internal wiring of the control panel for operating of the equipment the starter by using adequate capacity of single strand copper wire of standard make. The wiring shall be provided with plastic washers for identification of each wire at various joints. The wiring shall have to complete properly. m). Housing for all the equipment fabricated out of 16 SWG sheet having size of 750mm width x 1500mm height x 410mm depth and shall be fabricated with a hinged door at the front which shall have a proper locking arrangement. The housing shall be provided with a base frame fabricated out of 75mm ISMC welded/bolted to the housing at the bottom. The necessary brackets for the fitment of the above equipment. The housing shall have to be provided with necessary cut out spaces for meters/push button actuators/selectors actuators incoming and outgoing connections. And have air vents and shall have be painted with two coats of red oxide primer spraying two coats of synthetic enamel of specified shade from inside as well as outside after providing and applying of putty and smoothing of the surface. n). Auto transformer coils made out of 1st class electrolytic copper strips having capacity suitable for the above starter. The coils shall be provided with F class insulation tape. The coils shall have tapings taken out at 40%, 60% and 80%. The core of the auto-transformer shall be fabricated out of 1st class silicon 92 grade pota sheets cut to size and then tightening of the same adequately. The auto-transformer shall be out of M.S sheet of suitable thickness so as to make the tank leak proof, which shall have a lid at the top provided with holes for tightening the same to the tank. The tank shall be painted in two coats of red oxide primer. The job includes providing and filling of high grade low viscosity transformer oil of power make upto the required level in the tank so that the auto-transformer coils gets fully immersed. Adequate capacity electrolytic copper bus bar strips or cable shall be fitted for internal connections. The tank shall have to be fitted at back side of the starter The Job includes providing and fitting of 70 sq.mm copper cable(10 meter) with required number of copper lugs of size 70 sq.mm and Providing, fitting and installation of 01 KVA Constant voltage Stabilizer with accessories for providing of Single phase constant voltage for Starter Contactor. The Starter shall be provided with manufactures test certificate. | 3 | Job |
| 3 | Providing, Fitting, testing and commissioning of 02 HP open well submersible pump motor for priming purpose of horizontal pumping unit of below mentioned specifications. Motor Capacity: 02 HP. Out let: 1.5 Inch dia. Voltage: 200-220V. Phase: Single Phase. RMP: 2900 Ingress Protection: IP68 The outlet of above mentioned pump motor is to be fitted with the priming line of 10 cusec horizontal pumping unit. The Job also included providing and fitting of 02 inch dia. flexible Hose Pipe 30 mtr and 02 inch dia. Nipple and 01 no.reducer,15 Amp.SS combine and 6 sq.mm 2 core Al. cable (30 Mtrs.) along with other accessories. The job further includes full load testing of the above mentioned equipment. | 1 | Job |
| 4 | Providing, Supply, Laying and Fitting of XLPE insulated 1.1KV 180 sq.mm (210 mtrs ) un-armored Aluminum cable. The job includes crimping of the terminal ends of the conductor with hydraulic tool and providing and fitting of corresponding lugs. The conductor shall be of reputed make preferably Grand lays/ Havells/ Polycab/ equivalent and shall be as per relevant IS specifications. Manufactures test certificate shall be provided with the cable. The Job further involves Supply, Installation, testing and commissioning of Dual Linkage Motion tracking with Micro SD Card up to One TB of Solar Operated 4G Camera | 1 | comp job |
21 Days Left