Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4461486 |
|---|---|
| Organisation Name | Directorate Of Technical Education |
| Tender Brief | For Electrical And Communication Engineering Department Lab Equipments Are Required As Per New Syllabus |
| Last Date For Submission | 10th Jun, 2026 |
| Opening Date | 11 Jun, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 1000.00 |
| Estimated Cost | 0.00 |
| City | Arakandanallur |
|---|---|
| State | Tamil Nadu |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Upgradation of Labarotaries ECE DEPARTMENT | ||
| 2 | 8051 Micro controller Kit Operating voltage: +5 V dc. Flash memory: 4 kB (AT89C51) / 8 kB (AT89S52). RAM: 128 bytes internal RAM. 16 2 alphanumeric LCD display. Push buttons / tactile switches. DIP switches for digital input. Inbuilt ADC interface: LDR, potentiometer. Inbuilt DAC interface. Inbuilt stepper motor driver with stepper motor. Inbuilt DC motor driver with DC motor. 1 4 LED array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 LCD display, 1 PWM driver. 1 hardware interrupt key, inbuilt RTC. Inbuilt EEPROM and UART module. 4 7-segment display. Supports both Assembly and C language programming. PC interfaceable. | 1.000 | Nos |
| 3 | Single phase induction motor 1 HP, 230 V ac, 1500 RPM with loading arrangement 1 No. Voltmeter: (0 300) V ac, 96 96 mm with input terminals 1 No. Ammeter: (0 10) A ac, 96 96 mm with input terminals 1 No. Wattmeter: 2 kW, 96 96 mm with input terminals 1 No. Power factor meter: 96 96 mm with input terminals 1 No. Auto transformer: 0 300 V, 1 variac 1 No. MCB: 2-pole, 40 A / 230 V ac 1 No. Digital RPM indicator with proximity sensor 1 No. Aluminium brake drum: 230 mm diameter 1 No. Spring balance: (0 25) kg 02 Nos. Circuit diagram printed on front panel with instruments and connecting terminals. Motor and loading arrangement mounted on rigid channel frame with anti-vibration mounting pads, M12 1.5 bolt & nut, 85 mm dia 4 Nos. Mild steel powder-coated electrical panel table setup. | 1.000 | NOS |
| 4 | Auto Transformer Input: 230 240 V ac, 50 Hz. Output: Variable (0 270) V ac. Rating: 1 kVA. Insulation Class: Class F / Class H. Construction: Copper winding with carbon brush arrangement. Mounting: Bench-top / panel type. Protection: Suitable fuse / overload protection. | 1.000 | NOS |
| 5 | DTH trainer kit Power Supply: 200 V to 240 V ac, 50 Hz. Dish Antenna: 1.5 ft aluminium steerable dish antenna. LNB (Low Noise Block Down Converter): Input frequency: Ku-band. Output frequency: 950 MHz to 1450 MHz. Conversion gain: 65 dB. Noise temperature: 35 K (max). Set-Top Box Receiver in Trainer Form: IF frequency: 70 MHz. Video bandwidth: 50 Hz to 5 MHz. Video output level: 1 Vpp at 75 load. Video polarity: Normal/Inverted, switch selectable. Audio subcarrier frequency: Tunable from 5.0 MHz to 8.0 MHz. Remote control provided. HDMI cable: 10 m. Controls: Channel selection. Volume control. Fault Simulation: Five built-in simulated faults for troubleshooting experiments. IF signal disconnected. Video output fault. Audio mute fault. Tuner misalignment. RF output interruption. PCB Size: 15" 12" with multicolour section-wise block diagram. Standard Accessories: 1.5 ft dish antenna. LNB. Trainer PCB. Dish connecting wire. Audio-video cable. User manual. Acrylic cover. Hardware materials for assembly of dish antenna. Additional Features: DTH subscription connection with Doordarshanfree channels. | 1.000 | Nos |
8 Days Left