Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4006555 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repair Of Roof Treatment And Miscellaneous B/r Works In Building Nop-72,p-73, P-74, P-81, P-77, P-80, P-111 And P-114 At Zone-6 Under Age B/r-i Under Ge Babina |
| Last Date For Submission | 9th May, 2026 |
| Opening Date | 11 May, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 97400.00 |
| Estimated Cost | 4870000.00 |
| City | Babina |
|---|---|
| State | Uttar Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Removing existing water proofing treatment by brushing with wire brush, taking down cement concrete tile, existing plaster/cement concrete/lime coba etc in any thickness, cleaning of all foreign material such as fungus, moss, dust etc and remove from the site of all waste materials, roughing surface of corner to roof by wire brush and all the open cracks/honeycomb should repair properly with site made polymer mortar (cement: sand: 1:4) admixed with HS Latex Plus @10% by weight of cement. complete all as specified and directed. | 1882.00 | Sqm |
| 2 | M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stil green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed.Note :- Water proofing compound shall be measured separately | 1301.00 | Sqm |
| 3 | Supply only integral water proofing compound complete all as specified and as directed. | 264.00 | Kg |
| 4 | Providing and applying two coats of HS Elastoseal BTD a waterbased, single component, UV resistant elastomeric PU liquid membrane in white / terracotta / green colour. better UV resistance, we recommend use of white colour BTD, having SRI Index > 109, having solid content 80%, Elongation 400%, Tensile 2MPa, with the help of brush/Roller with the coverage of 2Kg/Sqm over a primer coat of Elastoseal BTD : Water (1:1) to achieve DFT of 1.5mm, Sandwich 40GSM fibre-mesh in between two coats etc. complete as per manufacturer recommendations complete all as specified and directed. | 1882.00 | Sqm |
| 5 | Note:(a) The work under item 1 to 4 shall be carried out by the authorized applicator of Manufacturer by using modern techniques. The contractor shall also furnish warranty of quality, finish work and effectiveness of waterproofing treatment under this item for a period of of 8 years from the date of completion along with manufacturer warranty of material for the same period. (b) Height of bldg may be more than 5 meters and roof have continous series of trapizium with no staircase to reach at the top of the building (c) The contractor shall have MOU with any one of manufacturer and also with their authorised applicator mentioned in the tender. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution work. (d) After preparation of the surface, Engr-in-Charge shall approve the same before applying finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 8 years warranty card at the time of submission of Final Bill. |
10 Days Left