Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4035508 |
|---|---|
| Organisation Name | Himachal Pradesh Irrigation And Public Health Department |
| Tender Brief | Providing And Installation Of One Nos. India Mark-iii (65 Mm) Deepwell Hand Pump At Village Sandholi Gram Panchayat Haripur Sandholi Under Jsv Sub Division Baddi Division Baddi Distt. Solan (hp) |
| Last Date For Submission | 29th Apr, 2026 |
| Opening Date | 29 Apr, 2026 |
| Document Cost | 350.00 |
|---|---|
| EMD | 5280.00 |
| Estimated Cost | 264000.00 |
| City | Baddi |
|---|---|
| State | Himachal Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing and installation of India Mark II (65mm), India Mark II (50mm) & India Mark-II extra deep (32mm) deepwell hand pumps as Per IS: 13056-1991 alngwith its upto date ammendments and IS: 9301 respectively comprising of following items:- Transportation of suitable truck mounted DTH & ODEX/ Percussion Calyx/ RC drilling rigs alongwith necessary accessories etc. to the site of work and erection of portable rig including levelling etc. complete in all respects as per direction of Engineer-in-Charge. | 1.00 | Nos |
| 2 | Drilling bores of 152 mm dia as per IS: 2800-1979 using ODEX (TUBEX) attachment required drilling in collapsible strata conglomerate, boulder, pebble, gravals, silt, clay etc. including cost of attachments, consumable store, bits, water, POL etc compelte with system of simultaneous lowering of 125mm nominal bore, 5.0mm thick MSERW fincut casing pipe which will be welded together using 2.5mm or 3.25mm dia Advani Oerlikon electrodes with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded, inclusive of the cost of bio-degradable and non-toxic foam flush etc. complete in all respect as per directions of Engineer-in-Charge( MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately). | ||
| 3 | 1X80 =80 | 80.00 | Rmt |
| 4 | Supplying and lowering of IS marked 125mm Nominal bore, 5mm thick fincut MSERW casing pipe as per IS 4270:2001 as per requirement of ODEX attachment from approved manufactures complete in all respects as per directions of Engineer-in-Chages . | ||
| 5 | 1X80 =80 | 80.00 | Rmt |
11 Days Left