Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4260966 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Addition Alteration To Otm Accn At Cair And Provision Of Hardstanding And Shelter For Garden Waste Shredder At Lrde Bengaluru |
| Last Date For Submission | 9th Jun, 2026 |
| Opening Date | 11 Jun, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 27600.00 |
| Estimated Cost | 1380000.00 |
| City | Bangalore |
|---|---|
| State | Karnataka |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | SCHEDULE OF WORKS | ||
| 2 | Dismantling tile work in floors and walls laid in cement mortar , for thickness of tiles 10 mm to 25 mm including stacking material within 50 metres lead. | 53.00 | SQUARE METRE |
| 3 | Providing and laying double charged polish finished Vitrified tiles of size 1000 x 1000mm in floor in (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. | 45.00 | SQUARE METRE |
| 4 | Providing and laying Vitrified tiles of 1000 x 1000 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. | 3.00 | SQUARE METRE |
| 5 | Providing and laying Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 600 mm of sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. | 5.00 | SQUARE METRE |
5 Days Left