Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4970624 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Priodical Services And Joint Filling To Runway Painting, Taxi Track, Atc Dispersal And Helipad Area Afs Tambaram |
| Last Date For Submission | 19th Aug, 2026 |
| Opening Date | 21 Aug, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 122600.00 |
| Estimated Cost | 0.00 |
| City | Bangalore |
|---|---|
| State | Karnataka |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | M & L for preparation of old surfaces of pavements and applying mechanically one coat of water based road marking paint white or yellow or black or orange colour for marking old lines, letters, dashes, arrows etc., exceeding 10cm width or girth complete all as specified and directed. | 65000.00 | Sqm |
| 2 | M & L for preparation of old surfaces of pavements and applying mechanically one coat of water based road marking paint white or yellow or black or orange colour for marking old lines, letters, dashes, arrows etc., not exceeding 10cm width or girth complete all as specified and directed. | 300.00 | XRM |
| 3 | M & L for preparation of old decorated concrete surfaces of any description over 10cm width or girth and applying mechanically one coat of synthetic enamel paint complete all as specified and directed. | 3000.00 | Sqm |
| 4 | M & L for preparation of old decorated surfaces of pavements and applying one coat of white wash etc complete all as specified and directed. | 34500.00 | Sqm |
| 5 | M&L for racking out old existing sealant compound and back up rod of the existing joints, dirt etc from construction/ dummy joints 10mm to 20mm wide and 25 mm deep, joint cleaned thoroughly with application of compressed air, joint shall be made dry, vacuum cleaned and free of dirt, oil vegetation and other debris for application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before placing the backup rod and pouring the sealant, thereafter filled with closed cell, medium density, cross linked polyethylene foam backup rod of 08 mm dia of complete length of the joint, over it to be filled with polyurethane joint sealant, applying masked tape on the edges of joints and removing the masking tape after filling of sealant all as per by the manufacturer's instruction complete all as specified and directed. | 100.00 | XRM |
6 Days Left