Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 6162605 |
|---|---|
| Organisation Name | Rail Wheel Factory |
| Tender Brief | Supply, Installation, Integration, And Functional Testing Of A Complete Probing Solution Compatible With The Existing Cnc Machine Setup. The Scope Includes: (1) Probe Kit (including Probe, Transmitter With Batteries). (2) Receiver Unit. (3) Connecting Cables And Essential Accessories. (4) All Required Probing Software/programming Cycles. (5) Modifications To Existing Nc/plc Programs To Accommodate The Probing System If Required. (6) Functional Testing And Training. Technical Specifications:- (1) Transmission Technology = 2.4 Ghz Wireless With Interference-resistant Spread Spectrum Technology (fhss Or Dsss). (2) Communication Range (probe To Receiver) = Minimum 15 Meters. (3) Applications Supported = Part Detection (including Axle Length), Centering And Alignment Detection Etc. (4) Input Signal Range = 13.5v To 30v Dc. (5) Output Signal Specification = 4v To 30v Dc, 40 Ma. (6) Repeatability = Not More Than 1.0 Micro Meters (2s); Better Repeatability Preferred. (7) Trigger/measurement Force (xy Plane) = Not More Than 0.75 To 2.0 N. (8) Minimum Distance Between Units = Minimum 0.5 Meter Between Adjacent Transmitters/receivers. (9) Stylus Overtravel Limits Xy Plane: Minimum + Or - 12 Degree ; Z-axis: Minimum 4 Mm. (10) Activation Method = M-code Controlled And Programmable By Other Standard Methods. (11) Environmental Protection (ip Rating) = Minimum Ipx8 For Both Probe And Receiver Shall Be Supported With Manufacturer's Or From Nabl/ilac Or Equivalent Accredited Lab. (12) Software Interface / Configuration = Integrated Software Cycles Or Digital Receiver Setup With Display And Remote Controller. (13) Status Indications = Visual Or Digital Display Of: Error Signals, Probe Pulse, Battery Status, Signal Strength Etc. General Requirements:- (1) The System Should Be Compatible With Major Cnc Controllers And Open For Integration. (2) Setup, Calibration, And Testing Must Be Done At The Site By The Supplier. (3) All Associated Documentation (user Manuals, Circuit Diagrams, Parameter Lists) Must Be Provided. (4) Training To The Cnc Operators And Maintenance Personnel Is To Be Included. (5) Manufacturers Test Certificate (mtc) For The Product Shall Be Submitted Along With The Supply. In Addition, The Manufacturer Shall Submit An Ipx8 Test Report / Certificate Of Confirmation Specifically Confirming Compliance Of The Supplied Product With The Ipx8 Rating. (6) Oem Or Oem Authorized Dealers Only Shall Quote & Shall Submit Oem Authorization Letter/authorized Dealer Ship Certificate (in Case Of Dealer)/ Oem Declaration Along With The Offer. (7) Data Sheet Of The Product Quoted Shall Be Submitted Along With The Offer. [ Warranty Period: 12 Months After The Date Of Delivery ] |
| Last Date For Submission | 18th Nov, 2026 |
| Opening Date | Refer to Documents |
| Document Cost | 0.00 |
|---|---|
| EMD | 0.00 |
| Estimated Cost | 0.00 |
| City | Bangalore |
|---|---|
| State | Karnataka |
21 Days Left