Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4942309 |
|---|---|
| Organisation Name | Public Health Engineering Department |
| Tender Brief | Corrigendum : Providing And Installation Of 90 Kw/120 Hp Centrifugal Pump-motor Set In Position-01 For Lykapur Zone, Replacement Of Damaged Flow Meter And Level Indicator At Ajoyghat Pumping Station At Churulia Water Supply Scheme |
| Last Date For Submission | 4th Aug, 2026 |
| Opening Date | 06 Aug, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 56000.00 |
| Estimated Cost | 0.00 |
| City | Bardhaman |
|---|---|
| State | West Bengal |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Horizontal Split casing Centrifugal Pumping Machinery with Channel Base Frame, Couplings, Coupling Guards, Companion Flanges, foundation bolt etc. with Horizontal foot Mounted, TEFC, Induction Motor, duty with adequate margin as per direction of EIC. M.O.C. for Pump:- a) Volute Casing-C.I. IS:210 FG:260 b) Impeller-BR IS:318 GR-LTB-2 c) Shaft - SS ASTM A 276 CL 410, ANLD d) Shaft Sleeves-SS ASTM A 276 CL 410ANLD-250-280 BHN e) Neck ring- LTB5(IS:318, Gr LTB-5) f) Discharge-200 M /Hour, Head-90 Mtr. (H-Q-P Curve of Pumps has to be submitted during the delivery) (Make:- Kirloskar/Mather & Platt /Other approved make) Specifications for Motor:- a) 90 KW(4 Pole, 3 Phase Induction Motor) b) Rotational Speed-1480 RPM c) Colling Type-TEFC d) Operating Voltage-415 V 10%, Frequency- 50 Hz 5%. e) Efficiency Class-IE-4 f) Protection Class-IP55 (Make:-CG/Marathon/Other approved ma | 1.00 | set |
| 2 | 200 mm X 125 mm eccentric reducer X 200 mm long, 8 mm thick as per IS:2062. | 1.00 | no |
| 3 | 100 mm X 200 mm concentric enlarger X 200 mm long, 8 mm thick as per IS:2062. | 1.00 | No |
| 4 | 200 mm cast iron, P.N.-1.0, double flanged Rising Spindle Sluice Valve generally confirming to IS 14846 having body door /dome/Bonnet and cover of cast Iron Gr FG 260, outside screen rising Spindle of IS 6603 Gr-12 cr-13, spindle nut & seat rings are Gunmetal as per 1S:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 10 kg/sqcm (seat test) and body tested to 15 kg/sqcm. All the valves should be tested by closed end method only.(Make:-IVI/Jupiter/Other approved make) | 1.00 | No |
| 5 | Installation of above supplied centrifugal Pump-motor set, reducer, enlarger, valves(Item No-1.01, 1.02, 1.03, 1.04) after withdrawing of existing damaged same from the base, removing the base frame, dismantling of foundations, making new foundation at the same place by using RCC, to avoid any vibrational damaged, inserted suitable sized of eye bolts, including supply of all erection items as required for instalation of pumping machinery, necessary inter-connection of motors with earth bus bar, power cable from LT MCC to motor etc as required for completion of work as per relevant IE Rules and Hydraulic Standards with the entire satisfaction of EIC.including hire charges of welding set, fuel, lubricant etc for completion of work, as per fully satisfaction of EIC. | 1.00 | Item |
11 Days Left