Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4901346 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Roof Treatment Of Certain Md And Otm Accn At Af Stn Memaura |
| Last Date For Submission | 12th Aug, 2026 |
| Opening Date | 20 Aug, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 112100.00 |
| Estimated Cost | 5805000.00 |
| City | Bareilly |
|---|---|
| State | Uttar Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Taking down all existing roof treatment and including removing all dust/other material by wire brush and cleaning dust etc from surface of RCC roof including flashing and junction of parapet complete all as specified & directed. | 4700.00 | Sqm |
| 2 | M&L for applying a coat of Nano technology based water proofing compound (1 part powder : 1 part liquid) of desired consistency with nylon brush @ 5 Sqm/Kg coverage over vertical/horizental surface of RCC roof and parapet complete all as specified and directed. | 4700.00 | Sqm |
| 3 | M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded agg) as levelling course, padding on chajja,in roof etc complete all as specified with WPC as per manufacturer's instruction applied over prepared surface as per Ser item No 2 on above. Note:- 1. WPC shall be measured and paid extra as supply only. 2. PCC shall be laid to acheive true slope towards the drain/weep holes. | 84.00 | Cum |
| 4 | Supply only integral liquid water proofing compound. | 142.00 | Kg |
| 5 | M&L for applying nanotechnology based Anti-corrosive with high strength carbon Fiber based shorter Chain Epoxy coating (Bond Coat) of finest quality, high strength, high on, durable, UV resistant, high scratch/ impact resistant, bacteria restant and thermally stable, semi transparent, mixed in proportion (4 base : 1 hardener) in required consistency @8 sqm/kg over the entire prepared surface of roof/parapet complete all as specified & directed. Note:- 1. Rate shall be included for mixing, surface clean dust free dry and free of wax, grease, oil, loose or peeling particle and foreign materials. 2. During application ambient temperature is preferred. 3. Frost, fog or damp condition should be avoided. | 4700.00 | Sqm |
14 Days Left