| 1 | Excavation in post holes in soft/loose soil n. exc 0.50 cum each, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25 cm including removing of surplus spoil to a distance n exc 50 mtr and making good the disturbed surfaces complete all as specified and as directed. | 34.00 | Each |
| 2 | Material and labour for PCC (1:3:6), type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete, in post hole, bed block & similar work etc including form work complete all as specified and as directed. | 10.00 | Cubic Metre |
| 3 | Providing and fixing/fabricating mild steel tubular poles/posts, framed work, trusses, purlins, rafters and similar structural members exceeding 3.5 m and up to 7.0 m height, fabricated from hollow square/rectangular/circular steel tubes of Grade St-240, ERW or induction butt-welded, conforming to IS 1239 (Part-1), IS 4923 or latest relevant IS codes, including cutting, bending, drilling, welding, fabrication, assembly, erection, alignment, fixing in position, bolts, nuts, special shaped washers, all fittings and accessories, surface preparation and finishing, complete in all respects as specified and directed by the Engineer-in-Charge. | 4900.00 | Kilogram |
| 4 | Providing all materials and labour for framed mild steel plates (plain or chequered), channels and similar steel sections, square cut or notched, including ordinary and countersunk holes, cutting to required shape and size, edge preparation, drilling, punching, bolting, riveting, fitting and fixing, without any attachments, conforming to Grade Fe 410-O or Fe 310-O as per relevant Indian Standards. The item shall include all necessary materials, labour, tools and plants required for fabrication and erection, complete in all respects as specified and directed by the Engineer-in-Charge. | 140.00 | Kilogram |
| 5 | Supplying and fixing machine-made mild steel screw bolts, 5 mm to 10 mm diameter of shank, with hexagonal or square head at one end and threaded at the other end, or threaded at both ends, complete with washers and one hexagonal or square nut to each threaded end, of length exceeding 50 mm but not exceeding 100 mm, including placing, tightening and fixing in position, complete in all respects as specified and directed by the Engineer-in-Charge. | 20.00 | Kilogram |
