Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4647671 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair And Servicing Of Overhead Cranes Upto 5 Ton Capacity Installed In Various Locations Under Age Em Iv Of Ge (south) Bathinda At Bathinda Mil Stn |
| Last Date For Submission | 14th Jul, 2026 |
| Opening Date | 16 Jul, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 50000.00 |
| Estimated Cost | 2500000.00 |
| City | Bathinda |
|---|---|
| State | Punjab |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Comprehensive preventive maintenance by technically qualified technician and rendering operationally EOT crane of capacity as mentioned below including assemblies inspection and maintenance of including checking / tightening of all nut , bolt & breaks any type any size complete system, adjusting etc of all breaks motions and VFD /VVVF drive adjustment setting of EOT / HOT cranes with having single or double girder type and providing greasing & oiling of traveling / moving parts of crane with connecting motor girder parts for movement of crane hoist / long / cross traveling and including maintaining the controlling of speed / creeping micro speed of motors with minor maint / repair electrically operated main control panel wire with connecting control wiring system consisting of main switch, step down transformer, contactor, HRC fuse, VFD, PLR, control pendent ,wire rope with break drum unit, gear box unit , oil levels, motor bed / foot ,electrical control cable, motor terminal, end cable carriage trolly , motor shaft, bush flange bearing with lathe work ,chain pulley block, ratchet clutch, gear block, chain wheel, chain etc and including locating the defect or fault and rectification of the fault and rectification of oil leakage etc any type any size and replacement of defected nut, bolt & washer and making it soundless/sound proof and after trails testing run of crane for smooth functioning / operation satisfactorily of the following mentioned capacity cranes/Hoist complete all as specified and directed. Details of EOT Crane (i) EOT crane of 5Ton capacity - 09 No. (ii) EOT crane of 3Ton capacity - 03No. (iii) EOT Crane of 2 Ton capacity- 10 Nos Total = 22 x 06 months = 132 Month | 132 | Per Crane Per Month |
| 2 | Notes applicable for srl item No. 01 :- (i) Inspection checking decarbonising & tightning of electrical connection in total system including replacement of thimbles etc. (ii) Inspection & checking of fuses, setting & tightning the same as per their capacity. (iii) Inspection and setting of voltage system including replacement of fused indicating lamp etc. (iv) Spares for EOT crane will be measured and paid seperately as given in Section II of BOQ. (v) Contractor will carry out comprehensive maintenance once in a month for six (06) months and maintain the record of same as per the performa of monthly maintenance check enclosed in the tender documents.The same shall be forwarded alongwith RAR failing which no payment shall be released to the contractor. (vi) Contractor will ensure serviceability and safety of crane during his each visit by way of maintining job card duly signed by Engr-in-Charge and JE E/M, (vii) The contractor will also send Technician on call basis in case of any fault. Fault to be rectified within 8hrs of receipt of complaint failing which Rs 500/- per day will be deducted till rectification of defect. (viii) Rates of all consumables such as lubricant, gear box oil, thrustor brake oil , nut bolt, split pins, bushes, gasket , Push Buttorn for pendent are deemed to be included in the quoted rates. (ix) Work to operate EOT crane shall be done through specialized agency having minimum 3 years of experience in this field. The contractor will have to take the approval of Accepting officer and submit the name of the specialized agency before executing the work at site. | ||
| 3 | Supply , fixing, adjustment in replacement of unserviceable AC Drive / verable frequency drive (VFD)/ frequency convertor device system of capacity of 7.5.0 KW three phase supply system with required input 3 x AC 380-480 Volt , 50 / 60 HZ and out put 3 x AC 0-480 Volt, frequency 0-400 HZ or as per existing sample with having setting controlling devices system for operating /controlling of slow / high speed for all motion and other controlling system etc for smooth functional of over head electric traveling crane of capacity 50 Ton and including making controlling cable connection of system and testing on load complete all as specified and directed. | 1 | Each |
| 4 | All as per srl item No 02 here-in-before but of capacity 5.5 KW complete all as specified and directed. | 2 | Each |
| 5 | M&L for servicing of 05 Ton Hoist crane comprising of the following:- (i) Greasing/oiling of required part ie shaft, coupling, rope drum shaft bearing etc. (ii) Checking & testing/adjustment of brakes for all the motions (iii) Checking & tightening of coupling bolts, motor foundation bolt , wheel etc. (iv) Checking the wiring connections in control panel and other accessories and to ensure that no loose/naked connection exist. (v) Checking of gear oil in gear boxes and topping oil if necessary . (vii) Cleaning of Bridge girder panel, complete all as specified and directed. | 9 | Each Job |
6 Days Left