Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3899470 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repairs And Retrofittings Works To Certain Buildings At Bikaner Suratgarh |
| Last Date For Submission | 27th Apr, 2026 |
| Opening Date | 29 Apr, 2026 |
| Document Cost | 3000.00 |
|---|---|
| EMD | 1500000.00 |
| Estimated Cost | 242827000.00 |
| City | Bathinda |
|---|---|
| State | Punjab |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Demolition/chipping of reinforcement concrete up to rebar depth by controlled hammering and drilling by mechanical means (use of specialised tools of agencies like HILTI) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate if required) complete all as specified and as directed by Engineer-in-Charge. | 315.00 | Cum |
| 2 | Supplying and Injecting Low viscous epoxy injection resin for crack filling in slab, beam etc, injection grouting material having Flexural strength of 40N/mm in 7 days and Compressive strength of 45N/mm in 1 day, by pressure and using injector with accessories till nozzles refused to accept the grout, all tools and materials incls Providing, drilling and fixing Nipples of 12mm dia & 55-75mm length for pressure injection grouting of polymer cement grout or epoxy grout etc complete all as specified and as directed. Make:- Conbextra EP10 of FOSROC or equivalent in Dr. Fixit/BASF/ PIDILITE Note : - Qty's are consedered are tentetive. The same will be executed as per site requirement. Including : Application of drilling and fixing NRV steel injection packers atleast of (12mm x 100mm long) by suitable machine followed by injecting low viscosity solvent free epoxy resin grout by suitable grouting pump at a pressure @ 3-6 Kg/cm2 or as instructed by manufacturer. After 24 hours, cut the nipples and seal it with polymer-modified mortor of Renderoc SP40 & equivalent as per specifications | 5986.00 | Kg |
| 3 | M & L for Cleaning & applying rust remover in two coats over rusted reinforcement surface and providing anti corrosive ReebakleenRR coating with two component epoxy based zinc rich primer/Rust passivation Inhibitor coat at the rate of 6-8 sq. mtr/ltr not less than 50 microns dft with Nitozinc primer or equivalent to reinforcement surface as per manufacturer s instructions including all scaffolding , machinery, tools tackles and clearing of debris. Make: Equivalent of M/s Fosroc / STP Ltd/Chemsol/Bostik/Choksey etc | 4068.15 | Sqm |
| 4 | M&L for applying of two component epoxy bonding agent to critical areas supplied in pre-weighed quantities for ready on-site mixing and use for bonding old concrete to new concrete/mortar having coverage 2.20 sqm/kg of approved make of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. | 1713.25 | Kg |
| 5 | Form work to soffits of suspended slab such as roof slab not exc 200 mm thick to rough finished surface of concrete | 439.00 | SQM |
6 Days Left