Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4123463 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Ge(s)btd 20 Of 2026-27 Special Repair Revenue And Minor Works Under Age Br-ii And Age Em-iv Of Ge(s) Bathinda At Bathinda Mil Stn (job No. Sr(b)-11 Of 24-25 Rev-04 Of 25-26 Rev-11 Of 25-26 Minor-33 Of 25-26) |
| Last Date For Submission | 19th May, 2026 |
| Opening Date | 21 May, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 80160.00 |
| Estimated Cost | 4008000.00 |
| City | Bathinda |
|---|---|
| State | Punjab |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Taking Down Chowkhats or Frame with Shutter ( with out taking out shutter from the frame ) exc 1.50 sqm not exceeding 4.0 sqm each as doors , windows & ventilators etc and removal from site complete all as specified and directed | 48.00 | Each |
| 2 | Taking Down Chowkhats or Frame with Shutter ( with out taking out shutter from the frame ) not exceeding 1.50 sqm each as doors , windows aaa& ventilators etc and removal from site complete all as specified and directed. | 12.00 | Each |
| 3 | Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. | 6.00 | Cum |
| 4 | Supply only Integral water proofing Compound complete all as specified and directed. | 25.50 | KG |
| 5 | Waterproofing treatment to sunken floor using acrylic based multipurpose polymer. The treatment shall be carried out as per manufactures specification. The treatment shall be include 1. Surface preparation of substrate by removing all traces of contaminates, loose and friable particles, cement laitance oils and grease, water repellent coatings etc 2. Injection grouting using cementitious grout if required. The payment for injection grouting shall be made separately etc 3. Repair to the substrate, filling of blow holes/voids and surface leveling using appropriate products specified by the manufacture. 4. All intersections of horizontal and vertical surface should be profiled with a mortar fillet of minimum 25mm x 25mm. 5. The moisture content of the substrate shall be checked before application of first coat at water proof coating at the rate of 200 g/m2 followed brush topping at 450g/m2 per mm. The second coat shall be reinforced with glass fabric between the first and second coat. 6. The treatment shall be protected by application of polymer modified cement mortar of thickness 10mm applied at the rate of 50g per mm. 7. Tech specification. | 50.00 | Sqm |
20 Days Left