Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4033309 |
|---|---|
| Organisation Name | Rural Development Department |
| Tender Brief | Thorana Water Supply Scheme Tah- Bhadrawati. |
| Last Date For Submission | 4th May, 2026 |
| Opening Date | 05 May, 2026 |
| Document Cost | 590.00 |
|---|---|
| EMD | 24000.00 |
| Estimated Cost | 2375477.00 |
| City | BHADRAWATI |
|---|---|
| State | Maharashtra |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Sub Work No-1 Tube well (150 mm dia , 60.0 m depth) Item No.14: Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering,preparing the bed for foundation andexcluding backfilling, etc. complete. | 0.97 | Cum |
| 2 | Item No.15: Providing dry trap / granite / quartzite / gneiss,rubble stone soling in 15cm to 20 cm thick layers (including hand packing and compacting), etc. complete. | 0.73 | Cum |
| 3 | Item No.16 : Providing and laying in situ following grades of Plain Cement concrete of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including normal dewatering, form work, compaction and curing, etc, complete. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) | 1.04 | Cum |
| 4 | Item No.17 : Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete | 6.09 | Sqm |
| 5 | SUB WORK 2 :- Estimate for the work of Pumping Machinery 3 BHP Item No.1-Providing erecting and giving test of Submersible Pumpsets conforming to is 8034 and motor conforming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene impeller. Motor suitable for working on 415 V + 10% .3 Ph., 50 Hz. A.C. supply Cable guard, thrust carbon/fibre beaning to accept entire hydraulic thrust, waterproof winding shall be Provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design antithrust stream lined non return valve shall be Provided with the pum. Suitable suction strainer shall also be provided. 3 core single / double run copper conductor submersuble type flat cable 3m and 2 pairs of erection clamps shall be provided along with the pump rates per pump upto 20 stages are as below. Submesible pump 100mm dia (with polypropylene /Noryl Impeller ) up to 20 stages. 3 B.H.P. Release 10% Part Rate amount for pumping machine full Rate 24828/- | 1.00 | No |
16 Days Left