Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4246080 |
|---|---|
| Organisation Name | Indian Institute Of Technology |
| Tender Brief | Installation Of Power Panel And Cable Laying For Spark Plasma Sintering (sps) System And Equipments At Cpf-302, Iit Bhilai |
| Last Date For Submission | 25th May, 2026 |
| Opening Date | 26 May, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 12000.00 |
| Estimated Cost | 0.00 |
| City | Bhilai |
|---|---|
| State | Chhattisgarh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Main Distribution panel: Fabrication, Supplying, Installation, Testing and Commissioning of Outdoor LT cubical type of suitable size and not less than 300mm deep made out of CRCA sheet steel 3.1mm thick CRCA sheet powder coated, processed with 7 tank process having sealing arrangement, dust, vermin, duly compartmentalised having 4 strip TPN Aluminium busbar with cable alleys, detachable cable terminating plates at the bottom, ventilator louvers with wire mess,all end terminations included inside the various chambers, danger notice boards, sign wirting.The panel shall be mounted on the floor and should be supported with bottom C-channel as rasied platform and as suitable for site conditions or as per directions of Engineer In-charge and having following switch gears, instruments and accessories mounted inside the cubicle panel i/c connection, interconnection with copper thimbles, earthing etc complete and as per CPWD specification as reqd. | ||
| 2 | Incoming :- 250 A FP MCCB 36 KA Ics = 100% Icu with thermal magnetic release with spreader terminals and rotary Handle - 1 No. TPN aluminium bus bars of 300 AMP rating - 1 set Metering LED Multifunction Digital Meter (VAF ) type with inbuilt selector switch - 1 no. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps and with toggle switches with MCB control - 1 Set Outgoing :- a) 125A 36kA FP MCCB with Rotary Handle and with ON/OFF and TRIP CKT indication lamps- 01 Nos b) 100A 30kA FP MCCB with Rotary Handle and with ON/OFF and TRIP CKT indication lamps- 01 Nos as Spare c) 63A FP MCCB - 4 nos Other items of panel: a) Aluminium Earth strip 25 x 5 mm size full width of the panel with earth stud at both ends-1 set. b)Incoming/Outgoing complete Sign writing - 1 job. c) Danger notice plate - 1 No. | 1 | Job |
| 3 | Wall mounted Sub panel for Spark Plasma Sintering Set: Fabrication, Supplying, Installation, Testing and Commissioning of Outdoor LT cubical type of suitable size and not less than 150mm deep made out of CRCA sheet steel powder coated, processed with 7 tank process having sealing arrangement, dust, vermin, duly compartmentalised having 4 strip TPN Aluminium busbar with cable alleys, detachable cable terminating plates at the bottom, ventilator louvers with wire mess,end termination, danger notice boards, sign wirting.The panel shall be mounted on the wall/pillar as per directions of Engineer In-charge and having following switch gears, instruments and accessories mounted inside the cubicle panel i/c connection, interconnection with copper thimbles, earthing etc complete and as per CPWD specification as reqd. | ||
| 4 | Incoming :- 125 A FP MCCB 36 KA Ics = 100% Icu with thermal magnetic release with spreader terminals and rotary Handle - 1 No. Metering/Indications: LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps and with toggle switches with MCB control - 1 Set Outgoing :- a) 100A 30kA FP MCCB with Rotary Handle and with ON/OFF and TRIP CKT indication lamps- 01 Nos b) 40 A TPN - 1 no Other items of panel: a) Aluminium Earth strip 25 x 5 mm size full width of the panel with earth stud at both ends-1 set. b)Incoming/Outgoing complete Sign writing - 1 job. c) Danger notice plate - 1 No. | 1 | Job |
| 5 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required |
13 Days Left