Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4578115 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repair Renovation Addition And Alteration Works At Rxi Buildings Rxii Buildings Messii Training Centre Laboratory Room And Store Room Of Training Centre At Annual Rate Contract Charbatia |
| Last Date For Submission | 15th Jul, 2026 |
| Opening Date | 18 Jul, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 178120.00 |
| Estimated Cost | 10312000.00 |
| City | Bhubaneswar |
|---|---|
| State | Odisha |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Taking down cement plaster on brick walls/ concrete surface, etc. including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, and depositing serviceable materials where directed and leaving the work clear of any plastering complete all as specified and directed. | 1660.00 | Sqm |
| 2 | M/L PCC pading in hirizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-o(12.5 mm graded stone agg.) 40mm thick complete all as specified and directed. | 1600.00 | Sqm |
| 3 | Material and Labour for rendering 15 mm thick in CM (1:4) including supply and mixing of WPC @3% by weight of cement on concrete surface of roof finished even and smooth without using extra cement over and including neat cement slurry @ 3 Kg /Sqm complete all as specified and directed. | 1600.00 | Sqm |
| 4 | M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed. | 50.00 | RM |
| 5 | Material and labour for providing water proofing treatment with a layer of APP based polymeric membrane, 3mm thick (minimum), weighing 3.50 Kg/Sqm reinforced with polyster non woven fabric (weighing not less than 160 gm/Sqm) over a tack coat of dustrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surface and Apply two coat of Aluminium paint of any surfaces description, over 10cm in width or girth,not otherwise described complete all as specified and directed. (Note : The overlaps shall be of minimum 75mm on longitudinal direction and 100mm on transverse direction) | 1600.00 | Sqm |
6 Days Left