Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 5008786 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair And Maintenance Of Water Supply Installations, Narmada Water Supply Line Alongwith Certain Other Water Supply Items Of Age E/m And Age B/r-ii Under Ge(a) Bhuj |
| Last Date For Submission | 15th Aug, 2026 |
| Opening Date | 17 Aug, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 73980.00 |
| Estimated Cost | 3699000.00 |
| City | Bhuj |
|---|---|
| State | Gujarat |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | M&L for making RCC pillar 600X400mm of height 1.50mtr to 2.0mtr (0.50m to 0.80m depth below GL) and base of size 700x500x200mm with top flange for arresting water supply pipe lines complete all as specified and directed. | 55.00 | Each Job |
| 2 | Following nomenclature are add on this above :- (a) Excavation below existing strata as required depth in soft / loose soil / SDR by mechanical means (b) 100mm PCC 1:4:8 type D2 using 40mm graded stone aggregate below pedestal of size 700mmx500mm. (c ) RCC nominal mix 1:1.5:3 (20mm graded aggregate) in pillar and base. (d) 12mm dia vertical bar 10 Nos for pillar and 12mm dia bar at 200mm C/C bothway in base of pillar. (e) 8mm dia bar for stirrups 125mmc/c for pillar/coloumn. (f) Plywood / Steel form work for pillar and square base. (g) Site clearance 3m in all around the pillar/post (h) Dewatering if required. (j) MS flat iron 50mm wide and 6mm thick approx 1m length for each pillar with required nuts and bolts. | ||
| 3 | Note :- (a) Working place in foul condition approx depth from existing ground level upto 6m. (b) Working length, approx 4km (c ) Shifting of construction materials manually / mechanically at contractor end. (d) Arrangements of dewatering equipment also at the end of contractor. (e) Dumping of construction materials at different location as per feasibility by the contractor. (f) Deployment of Crane/JCB / Tractor trolley / other mechanical means for access on site at the only arranged by the contractor. (g) Department will not be responsible in case of theft (h) Electricity and water will not be supplied by the MES (j) Execution site is available minimum upto 1000m from service road. (k) Site is available in steep slop approx. 6mtr from natural ground level. (l) RCC pillar will be made as sample matched which is existing. (m) All are above quoted in deemed rates separately will not be measured / paid. | ||
| 4 | M&L for making RCC pillar 600X400mm of height 2.00mtr to 2.50mtr (0.50m to 0.80m depth below GL) and base of size 700x500x200mm with top flange for arresting water supply pipe lines complete all as specified and directed. | 20.00 | Each Job |
| 5 | Following nomenclature are add on this above :- (a) Excavation below existing strata as required depth in soft / loose soil / SDR by mechanical means. (b) 100mm PCC 1:4:8 type D2 using 40mm graded stone aggregate below pedestal of size 700mmx500mm (c ) RCC nominal mix 1:1.5:3 (20mm graded aggregate) in pillar and base. (d) 12mm dia vertical bar 10 Nos for pillar and 12mm dia bar at 200mm C/C bothway in base of pillar. (e) 8mm dia bar for stirrups 125mmc/c for pillar/coloumn. (f) Plywood / Steel form work for pillar and square base. (g) Site clearance 3m in all around the pillar/post (h) Dewatering if required. (j) MS flat iron 50mm wide and 6mm thick approx 1m length for each pillar with required nuts and bolts |
6 Days Left