Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4928089 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repair To Md Accn And Otm Accn Effected By Efflorescence In Mil Stn Bikaner Under Ge (n) Bikaner |
| Last Date For Submission | 15th Aug, 2026 |
| Opening Date | 22 Aug, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 144250.00 |
| Estimated Cost | 7950000.00 |
| City | Bikaner |
|---|---|
| State | Rajasthan |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Step-1-Taking down the old plaster along with brick joint mortar up to 15 mm depth shall be removed by mechanical means of seepage area from outside and inside (consider at least 300 mm extra area all around) complete all as specified and as directed. | 3600.00 | Sqm |
| 2 | Step-2-Cleaning of surfaces after removing of plaster by clean and washing with water complete all as specified and as directed. | 3600.00 | Sqm |
| 3 | Step-3-M&L for pointing of brick joints with polymer modified mortar Sika MonoTop-122F (Compressive strength 50 Mpa in 28 days as per ASTM C 109-7 cm cube) or equivalent make specified in list of makes along with a bonding primer made by Sika Latex SBR (Tensile adhesion strength 1.5 N/mm2 (concrete failure) (as per EN 1542) or Equalent out of makes specified in list of makes complete all as specified and as directed. | 3600.00 | Sqm |
| 4 | Step-4- M&L for fixing of NRV nozzles in a straight line near to old DPC followed by sealing of nozzles as well as a layer of 12-15 mm thick polymer modified mortar applied with Sika Mono Top -122 F (Compressive strength 50 Mpa in 28 days as per ASTMC 109-7 cm cube) or equivalent make specified in list of makes along with a bonding primer made by Sika latex SBR (Tensile adhesion strenth 1.5 N/mm2 (concrete failure) as per EN 1542) or Equalent out of makes specified in list of makes. Allow moprtar to cure for 24 hours complete all as specified and as directed. | 3600.00 | Sqm |
| 5 | Step-5- M&L for injecting the polyacrylic injection Sika injection-306 or equivalent make specified in list of makes (with a versatile and adjustable reaction time having mixed viscosity 3-11 Mpa s at +20 degree C, reaction time adjustable according to ambient temperature and execution requirement between 8-50 Mins PH 9-10 on next day and tested as per Wissbau No 2002-094-(1A) function test with re-injectable hose system through NRV nozzles and allow product to react so that a seal can be created within the brick work complete all as specified and as directed. | 950.00 | Each |
6 Days Left