Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4391537 |
|---|---|
| Organisation Name | Bharat Coking Coal Limited |
| Tender Brief | Corrigendum : Repair And Maintenance Of Quarter Sq-14 At Gandhi Nagar Bhowra Under E.j. Area |
| Last Date For Submission | 3rd Jun, 2026 |
| Opening Date | 05 Jun, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 2100.00 |
| Estimated Cost | 167102.00 |
| City | Bokaro |
|---|---|
| State | Jharkhand |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) | 59.30 | M2 |
| 2 | 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) | 17.56 | M2 |
| 3 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate | 47.03 | M2 |
| 4 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 161.73 | kg |
| 5 | 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm ( 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm ( 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm ( 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ( 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).. | 1.66 | M2 |
3 Days Left