Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4462325 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | Road Safety Work Of Bulandshahr-syana-garh Road (sh-65) Near Village Imlia To Bulandshahr-saidpur Road (odr) In District Bulandshahr |
| Last Date For Submission | 8th Jun, 2026 |
| Opening Date | 08 Jun, 2026 |
| Document Cost | 767.00 |
|---|---|
| EMD | 38000.00 |
| Estimated Cost | 375000.00 |
| City | Bulandshahr |
|---|---|
| State | Uttar Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Road marking with hot applied thermoplastic compound with reflectorsing Glass beads on bituminous surface. Provoding and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads@250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes. Including cost of, all material, Bitumen, labour, T&P, all taxes and labour cess complete. But excluding GST. | 448.00 | Sqm |
| 2 | Road marking with hot applied thermoplastic compound with reflectorsing Glass beads on bituminous surface. (Reapted Bar) Provoding and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads@500 gms per sqm area thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes. Including cost of, all material, Bitumen, labour, T&P, all taxes and labour cess complete. But excluding GST. | 39.00 | Sqm |
| 3 | Refliective Raised Pavement Markers (Cat Eye/Road Stud) Supply and fixing of raised pavement marker with Made of Plastic body of RPM/Road Stud shall be moolded from ASA (Acrylic Styrne Acrylonitrite) or HIPS (High Impact Polystyrene) or Acrylonitrite Butadien Styrene (ABS) or Any other suitable material approved by the Engineer. The marker shall support a load of 13.635 kg tested in accordance with ASTM D4280. The Reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face, lenses shall be mouled of meithyl methecrylate confirming to ASTM D788 of equivalent. The slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro-reflecting surface shall not be less than 13.00 sq.cm the marker height shall not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm. The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name, trade or other means of identification of the manufacture epoxy installations, excess adhesive around the edge of the marker excess adhesive on the pavement and adhesive on the exposed surface of the marker shall be immediately removed. The Contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflecting panel, to the Engineer in addtion a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers, in case the markers are displaced, damaged, get wom out or lose their reflectivity compared to stipulated standard the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer, at his own cost. The rate shall include all material, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-charge. Including cost of, all material, Bitumen, labour, T&P, all taxes and labour cess complete. But excluding GST. RPM (With shank) | 200.00 | Nos |
6 Days Left