Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3895865 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | Corrigendum : Construction Of Civil Work In Pocso Court No. 02 |
| Last Date For Submission | 15th Apr, 2026 |
| Opening Date | 17 Apr, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 5640.00 |
| Estimated Cost | 282000.00 |
| City | Bundi |
|---|---|
| State | Rajasthan |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. | ||
| 2 | 5.0mm thick (Wt. 8.4 Kg./Mtr. Sq.) | 36.00 | Sqm |
| 3 | Extra for corrugated Fiberglass Reinforced Plastic (FRP) (2.5" /4.2"/6") or step down (2.5" /4.2"/6") as specified. | 36.00 | Sqm |
| 4 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in charge .(Glazing and paneling to be paid for separately). | ||
| 5 | For fixed portion |
7 Days Left